Question about Dodge Ram 1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1995 dodge ram 1500 V8
hi, you should find a serp. belt routing diagram on the cross member that supports your radiator. if not- disconnect neg batt terminal for safety. you'll need a long breaker bar metric. as most, if not all fasteners on your ram are in metric. cant remember right size socket, but just go through your metric set and "eyeball"it. once you have the proper socket-detention the belt by pulling breaker bar clockwise. remove old belt. it maybe useful to take a picture of how your old belt is routed with a camera equipped cell phone (if it is still on) so that if you get into trouble, you can look at the picture as a reference point. new serpentine belt install--insert new belt over the cooling fan route under crank pulley-over fan pulley, around p/s pump pulley,up and around a/c comp pulley, under idler pulley, over alternator pulley and finally around tensioner pulley. pull breaker bar clockwise to slip belt past and onto the tensioner pulley. release tension on tensioner. be sure to check tensioner indexing marks located on the tensioner arm this is to make sure the new belt is installed properly. reconnect neg batt cable to terminal-remove any hand tools from engine bay, start engine and observe belt operation. hope this helps!
Posted on Feb 13, 2009
SOURCE: 86 Dodge ram D - 50 - Fuel Pump
A carburetor type engine has the pump on the engine near the front on the side--trace the fuel line down. Fuel injected engines have the pump located in the fuel tank.
Posted on Aug 24, 2009
Testimonial: "THANK YOU "
it doesn't have a fuel pump relay it has a fuel pump control unit and it is located on the chassis back quarter drivers side near the tube cross member for chassis on top of chassis rail near bed mount. locate the rear springs front perch and it will be above that on top of rail.
hope this helps. good luck and please ask any question you have.
Posted on Oct 25, 2009
Testimonial: "Thanx for info..no wonder I couldn't find Relay! "
First check any ignition/fuel related fuses. Check to make sure you have 12 volts coming into the pump and coil. If nothing to the fuel pump replace the fuel pump relay - if you do have power to the fuel pump then replace the pump. If nothing is coming to the coil it is either an ignition relay or a wiring issue. If you have 12 volts to the coil but no spark then replace the coil.
Also the fuel pump/relay would not kill the coil.
Posted on Jan 21, 2010
relay is located on driver side under hood mounted on fender back from battery use a test light there is a couple of relays there also going to distributor good luck
Posted on Feb 21, 2010
Tips for a great answer:
Feb 03, 2016 | Dodge Cars & Trucks
Jul 28, 2015 | 2006 Dodge Ram 1500
Mar 18, 2015 | Dodge Cars & Trucks
Aug 20, 2014 | 2006 Dodge Ram 3500 Truck
Dec 15, 2010 | 2008 Dodge Ram Pickup 1500
May 25, 2010 | 2006 Dodge Grand Caravan
Jan 25, 2010 | 2006 Dodge Ram 2500
Oct 27, 2009 | 2001 Dodge Ram 2500 Truck
Oct 25, 2009 | 2004 Dodge Ram 3500 Truck
238 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: