Question about Cars & Trucks
Where does vacuum line go for cruise control on 1999 town and country 3.8
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
2001 town & country. My airbag/seat belt light came on, cruise control and horn stopped working. Dealer said it was the "clock spring" and usually covered as a recall item.
Posted on Sep 08, 2008
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the bcm.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the bcm to the jb. Slide the bcm downward to disengage guide studs on jb from channels on bcm mounting bracket
Remove bcm from jb.
Posted on Jan 02, 2009
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket
Posted on Mar 23, 2009
transmission speed sensor needs replacing about 40.oo$ at the dealer sits on the right side of transmission looking from the front of the radiator g s.
Posted on Jun 07, 2009
1.) Open the hood of your van
2.) On the passenger side of the vehicle, look behind the headlight
enclosure. You will see a set of wires running into the back of it.
This is the power clip. Either with your hand or a flat-head
screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.
Posted on Oct 29, 2009
Tips for a great answer:
Oct 12, 2014 | Cars & Trucks
Nov 05, 2013 | 2006 Chrysler Town & Country
Feb 27, 2013 | 2004 Chrysler Town & Country
Nov 12, 2010 | 1999 Chrysler Town & Country
Mar 29, 2010 | 1996 Chrysler Town & Country
Mar 18, 2010 | Chrysler Town & Country Cars & Trucks
Jul 30, 2009 | 1996 Chrysler Town & Country
Dec 20, 2008 | 2000 Chrysler Town & Country
Aug 31, 2008 | 2001 Chrysler Town & Country
55 people viewed this question
Usually answered in minutes!