Question about 2007 Dodge Caliber SXT Sport Hatchback

Open Question

How do I remove the front fender on a dodge caliber

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 113 Answers

SOURCE: how do I remove the drivers front fender of a 1994 Dodge Ram 2500

yes undo your battery as ans air bag has a connector on the seat and if unplugged could cause air bags to go off with battery still hooked up leat sit for five min. should be four bolts or nuts holding seat down

Posted on Sep 15, 2009

Ad
  • 1 Answer

SOURCE: How do you remove a dodge caliber serpantine belt?

take an 11/16 wrench and turn tensioner pulley towards cockpit then slip the belt off of the top idler pulley

Posted on Jun 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace my passengers side fender on a 2012 dodge durango


REMOVAL Hope this helps?
Labor Operations: Click to display a list of Labor Operations associated with this procedure

  1. Mark fender location.

  2. Remove wheel if necessary.

  3. Remove wheel liner.


  4. Remove front fascia as necessary, (Refer to 13 - Frame and Bumpers/Bumpers/FASCIA, Front - Removal) .


  5. Remove front lower mounting bolts.

  6. Loosen rocker panel cover as necessary.

  7. Remove rear lower mounting bolts.


  8. Remove upper fender mounting bolts.

  9. Remove fender from vehicle.
















Jan 05, 2018 | Dodge Durango Cars & Trucks

1 Answer

How to replace the external front left side door handle of dodge caliber


probably have to remove the door card to get access to bolts/nuts inside the door

Feb 10, 2013 | 2008 Dodge Caliber

2 Answers

I NEED TO CHANGE MY DODGE STRATUS 2004 BATTERY . WHERE IS IT LOCATED


the battery is located in front of the drivers side front wheel behind the inner fender well.you will have to remove enough of the inner fender to gain access to the battery to replace it.

Jun 22, 2011 | Dodge Stratus Cars & Trucks

3 Answers

Is it hard to replace alternator? I heard that you take right wheel off to get to it?


1. Disconnect and isolate negative battery cable at battery. 2. Remove the right front wheel. 3. Remove the underbody air dam.



4. Remove the accessory drive splash shield.



5. Remove the accessory drive idler pulley.



6. Loosen the lower mounting bolt.



7. Loosen the A/C compressor and relocate, pull down and to outboard side of vehicle to make room to remove generator.



8. Unplug field circuit from generator.



9. Remove the B+ terminal nut and wire.



10. Remove the upper mounting bolt. 11. Remove the generator lower mounting bolt.



12. Relocate the battery terminal (1) to the other side of the A/C line (2) for removal of the generator.



13. Rotate generator pulley down.



Dec 14, 2010 | 2008 Dodge Caliber

1 Answer

2007 dodge caliber transmission light is on


Hello
You'll notice what appears to be a dipstick tube at the front of the vehicle on the drivers side, and it should have a warning label to use CVT oil. But when you remove the top, there's no stick. The dipstick itself is a "special tool" (Miller No. 9336). The stick is marked for fluid levels for different temperatures, although there is an acceptable range.
Read the instructions carefuly that come with the tool
Thank you!

Jul 12, 2010 | 2007 Dodge Caliber SXT Sport Hatchback

2 Answers

2007 Dodge Caliber R/T dashboard lighting


It may be lose or burned out. Call the local auto-electric shops and ask what they would charge you to replace it

Mar 02, 2010 | 2008 Dodge Caliber

2 Answers

How to change head light bulbs on a dodge caliber


Park the Dodge Caliber on a flat paved or concrete surface. Turn the steering wheel all the way to the side opposite the headlight you are replacing. In other words, if you are replacing the left headlight, turn the wheel all the way to the right. Apply the parking brake and release the hood latch.
  • Step 2 Place a wheel chock behind one of the rear tires.
  • Step 3 Open the hood. This is to allow some light to reach down into the engine compartment.
  • Step 4 Raise the front quarter panel of the side you need to replace the headlight on with the floor jack and place the jack stand under the front frame rail on that side.
  • Step 5 Remove the fender well plugs using the plastic plug puller tool. You do not have to remove the entire fender well cover, but the more plugs you remove, the more access it will give you to the headlight assembly.
  • Step 6 Unplug the headlight switch. Make sure you are unplugging the headlight which will be the inboard plug.
  • Step 7 Turn the headlight bezel a quarter turn counterclockwise and extract the bulb and bezel.
  • Step 8 Insert the new headlight into the bezel, being careful not to touch the glass bulb.
  • Step 9 Insert the bezel and headlight into the headlight assembly and turn a quarter turn clockwise to lock it into place.
  • Step 10 Plug the wire connector into the headlight. This would be a good time to get up and go test the light to make sure it's working.
  • Step 11
  • Dec 28, 2009 | 2009 Dodge Caliber

    1 Answer

    How do I take off a front fender?


    you don't remove the fender,
    remove the right front wheel,in the front side of the inner fender there is a panel you need to remove to gainn access to the battery

    Nov 23, 2009 | 1999 Dodge Intrepid

    1 Answer

    How do i remove a dodge caliber's battery?


    remove air cleaner intake tube(2 thumb retainers) and air filter box . remove batt hold down in front of batt and nev.cable then positive cable last. reinstall in reverse order..4122562.jpg4d5d177.jpg

    Sep 01, 2009 | 2007 Dodge Caliber SRT4 Hatchback

    Not finding what you are looking for?
    2007 Dodge Caliber SXT Sport Hatchback Logo

    Related Topics:

    269 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    77499 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...