Question about 1999 Chrysler 300M

Open Question

Chrysler 300 keeps blowing the auto shutdown relay

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 335 Answers

SOURCE: engine starts but shuts down immeditately

1989 Chrysler 2.5 L Turbo has a duel hall effect pick-up in the distributor. It is possible that the pick-up is not working. A "start and stall" indicates that this may be the problem.
Another problem may be the fuel system. Check fuel pressure with key on... should be 40-50 psi on multi-port. 30-40 on TBI
PS If the auto shutdown relay quit then you would not get a start at all. PSS oil pressure will cause a similer problem

Posted on May 26, 2009

Ad
  • 239 Answers

SOURCE: I have a 1999 chrysler

If your 30 AMP fuse for the fan is blowing and your AC does not work, it may be that your Passenger side fan stopped working. The problem is, then , that you may overheat quickly. This 30 Amp fuse is located under the hood in the fuse box, and is clearly marked on the cover. These are not cheap fuses, and if they blow they will indicate a serious issue, so don't just replace the fuse. With the engine off, and the key in your pocket and the engine being cold, reach down to the fan and give it a spin. Check BOTH fans for spin. If they make a rough squeeking noise or will not spin at all, then it is very likely the fan making the nosie or not spinning is the culpret and has to be replaced. It makes dollar sense to replace them BOTH as an assy, since they have the samer milage on them, (Dollar-wide it is more cost effective and less of a pain to replace. If you need details on how to remove the electric fan assy, just hollar back and we can line it out for you. (It's not as bad as you might think).

Posted on Jul 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed motor. Have fuel but no spark.have power to fuel relay but none to ASD relay


Stalling repair tips for all cars, especially Chrysler, Dodge ...

www.allpar.com/fix/stall.html
We would like to note that Chrysler products have a tendency to have ... The Auto Shutdown Relay (ASD) - actually, this rarely breaks, but when it does, ... You can test it - if your car won't start, just unplug the electrical connection from the MAP sensor. ... Small, hard to see fuel line cracks can cause stalling and non-starting.

Automatic Shutdown Relay - Allpar

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
In my car have not spark, no fuel and I have code KPS Thank you. ... not getting spark ive change the rotor ...


Jan 01, 2016 | Cars & Trucks

1 Answer

What fuse do i replace to make my windshield wipers work Chrysler 300


Highly doubt the fuse being the problem . If the fuse is blown ,that circuit has a problem , short to ground , wiper motor drawing to much amprage . Fuse's do not blow for no reason . Fuse # 18 -30 amp . under hood fuse box . There is also a relay , wiper on/off relay in same under hood fuse box . Also wiper hi/low relay ! There is also alot of electronics involved . integrated power module , front control module , plus C.A.N bus network . How to Diagnose Controller Area Network CAN . Could be wiper / washer switch , wiper motor , communication problem , module problems , Relay problem . Google chrysler intergrated power module . they have had a lot of problems with that thing .

Oct 12, 2015 | 2006 Chrysler 300

1 Answer

Whats the codes p0685 an p0688 on a 2004 chrysler pacifica mean


P0685 CHRYSLER - Auto Shutdown Relay Control Circuit Failure

Short or open in Auto Shutdown (ASD) relay circuit
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
Possible Causes
- ASD relay circuit is open or shorted
- Failed Auto Shutdown relay
- Failed ECM
Tech Notes
Check all the ECM fuses, if the fuses are OK try replacing the ASD relay.

P0688 CHRYSLER - Auto Shutdown Relay Control Circuit Low

The Front Control Module (FCM) has detected the supply voltage below an acceptable value
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
Possible Causes
- ASD relay circuit is open or shorted
- Failed Auto Shutdown relay
- Failed ECM
Tech Notes
Check all the ECM fuses, if the fuses are OK try replacing the ASD relay.

Dec 29, 2014 | 2004 Chrysler Pacifica

1 Answer

What causes#37 fuse to keep blowing on 2004 chrysler pacifica


The fuse goes to the auto shutdown relay from there it goes to two powertrain control modules. Test the relay or replace or there is a short in the system

Oct 04, 2014 | 2004 Chrysler Pacifica

1 Answer

2007 Chrysler 300 AC not cold enough


Might have a small leak in hose at the conections. Go to auto parts and get a dye to put in system. It will tell you if you have a leak.

Jul 12, 2014 | 2007 Chrysler 300 AWD Sedan

1 Answer

What does the codes 0627-0681-0680-0688 on 2006 chrysler sebring 2.4 16 valve 4 cly


Hi there:

DTC P0627 CHRYSLER - Fuel Pump Relay Control Circuit
ECM (Engine Control Module) detected an open or short in the fuel pump relay circuit
Possible causes
- Fuel pump circuit open or short
- Fuel pump circuit poor electrical connection
- Faulty fuel pump relay
- Faulty fuel pump control module (if applicable)


DTC P0680 - Cylinder 10 Glow Plug Circ, and,

DTC P0681 - Cylinder 11 Glow Plug Circ
The Engine Control Module (ECM) has detected a fault in the cylinder #10 or #11 glow plug circuit.


Possible causes
- Cylinder #10, or #11 glow plug circuit is open or shorted
- Faulty cylinder #10 or #11 glow plug
- Faulty glow plug module Help with this


DTC P0688 CHRYSLER - Auto Shutdown Relay Control Circuit Low

The Front Control Module (FCM) has detected the supply voltage below an acceptable value.

Possible causes
- ASD relay circuit is open or shorted
- Failed Auto Shutdown relay
- Failed ECM


Check all the ECM fuses, if the fuses are OK try replacing the ASD relay.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 03, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

P0688 2005 pt


P0688 CHRYSLER - Auto Shutdown Relay Control Circuit Low
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
Possible causes - ASD relay circuit is open or shorted (replace this relay first)
- Failed Auto Shutdown relay
- Failed ECM (engine control computer)

Mar 22, 2012 | Chrysler PT Cruiser Cars & Trucks

1 Answer

My 2003 Chrysler PT cruiser has no spark. What is the possible cause?


make sure auto shutdown relay isnt burnt out..also have it checked for a bad crank/cam sensor

May 06, 2010 | 2003 Chrysler PT Cruiser

2 Answers

My 2.5 litre 97 Cirrus will not start after PCM replacement


check or replace the ASD relay, located in the power distribution center. Hope this can help, please put some rating.

Apr 20, 2010 | 1997 Chrysler Cirrus

1 Answer

Engine starts but shuts down immeditately


1989 Chrysler 2.5 L Turbo has a duel hall effect pick-up in the distributor. It is possible that the pick-up is not working. A "start and stall" indicates that this may be the problem.
Another problem may be the fuel system. Check fuel pressure with key on... should be 40-50 psi on multi-port. 30-40 on TBI
PS If the auto shutdown relay quit then you would not get a start at all. PSS oil pressure will cause a similer problem

May 26, 2009 | 1989 Chrysler LeBaron

Not finding what you are looking for?
1999 Chrysler 300M Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...