Question about 2009 Ford Escape

Open Question

2010 ford escape throttle body - 2009 Ford Escape

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 64 Answers

SOURCE: 2010 Ford Escape hybrid. can I modify the auto lock timer?

yes it can in the message center, there should be a lenghty section on it in the owners manuel

Posted on Jul 22, 2009

macvernal
  • 46 Answers

SOURCE: My 2003 Ford Escape XLT

Is the vehicle a four cylinder or V6, either way if what they stated to you is indeed the only problem, there are a few Mcgyver options open to you for far less than what they quoted. The lever itself is only a metal arm with a protruding ball type fitting for the cable. The leftmost cable is for the cruise control. I take it the bushing on the cable is worn or the rod itself has the lip damaged. Either way from in the hood snap the accelerator linkage a couple of times and watch how the cable comes off. A small tie strap between the cable and the end of the rod will probably solve your woesmacvernal.jpg

Posted on Mar 28, 2011

Testimonial: "Thank you! I will check it out. They say the control arm has a "flat spot" causing the cable to slip off, thus no cruise control.?.?. "

johnf1aresti
  • 1098 Answers

SOURCE: Loud clicking sound when trying to start my 2010 ford escape. It dosn't start, it just clicks

check for battery,battery terminals not clean for good contact,faulty starter solenoid. Tapped the starter with something heavy and try to start.

Posted on Sep 28, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

A picture (image) of a spanner appears in the dash board of my ford escape 2011 model. The engine slows down by itself. Once I put off the ignition and restart under one minute, it comes back to life....


I have a 2012 Escape 4cyl AWD. Check your owners manual. The wrench light on the lower left of the dash panel indicates a problem with the Electronic throttle system. Mine turns on especially when it is cold and after it has been idling for awhile. The car goes into some sort of default mode. It runs, but not very well. High revs and weird transmission shifts. I had a similar problem with a 2011 Dodge Avenger and it was the throttle body. If I shut it off, I can immediately restart, and the light is off, and it runs fine. This has been going on for over 7 months. I plan to change the throttle body...someday. I already bought one:
picture-image-spanner-appears-in-dash-d2o1mfgeoz3uqn0tk1cel01q-5-0.jpg

Jan 30, 2015 | 2011 Ford Escape

2 Answers

2010 ford focus not accelerating when gas pushed


Is engine light on dash? It could be TPS switch (throttle position sensor) on throttle body on engine.

Aug 26, 2014 | 2010 Ford Focus 1.6

1 Answer

Ford engine codes


Could be throttle body.

Jul 29, 2014 | 2010 Ford Escape

1 Answer

2010 ford escape stalls while driving, restarts after


My Ford Escape is dying on me while driving. After doing some googling, there's 1000's of others with the same complaint and it usually is a defective throttle body.

I'm amazed that people haven't died from this and that there hasn't been a recall. I almost got into a bad accident when the car died on me en route.

Aug 29, 2013 | Cars & Trucks

2 Answers

My 2003 Ford Escape XLT had no cruise control a couple of years ago.....sometime after I took it to a local Ford dealer for other repairs...ACI replacement...and refused recommended brake replacement. ...


Is the vehicle a four cylinder or V6, either way if what they stated to you is indeed the only problem, there are a few Mcgyver options open to you for far less than what they quoted. The lever itself is only a metal arm with a protruding ball type fitting for the cable. The leftmost cable is for the cruise control. I take it the bushing on the cable is worn or the rod itself has the lip damaged. Either way from in the hood snap the accelerator linkage a couple of times and watch how the cable comes off. A small tie strap between the cable and the end of the rod will probably solve your woesmacvernal.jpg

Mar 28, 2011 | 2002 Ford Escape

2 Answers

My 2003 Ford Escapes gas pedel sticks when you try to take off.


The most common reason for this is a buildup around the butterfly valve in the throttle body. Under the hood, find the intake hose that runs from the air cleaner box to the intake of the engine. Remove the hose from the throttle body.

On the inside of the throttle body, you will see the butterfly valve which opens when you press the gas pedal. Clean the throttle body with a suitable cleaner such as Throttle Body Cleaner, which can be found at your local parts store. An old toothbrush and rags work well for cleaning the valve and behind the valve. Dry everything up and reassemble.

Other reasons could be sticking linkages at the throttle body that actuate the butterfly valve, or something as simple as your floor mat catching the pedal when depressed.

Jan 01, 2010 | 2003 Ford Escape

2 Answers

IAC control valve. Locato\ion 2002 ford escape


If it's not idling and has problems starting, it's probably the IAC motor. It's located on the throttle body. Follow the airfilter box all the way to the engine, where the rubber flex hose attaches. The throttle body should be the first aluminum part you come to. Attached to the side you'll find small little aluminum part with a small wire harness attached. Unplug it, take the IAC motor off and clean inside with carb cleaner. This should fix the problem with the idle.

Sep 11, 2009 | 2002 Ford Escape

1 Answer

Where is the iac on a 2002 ford escape 4 cylinder


I IAC is along the intake tube from the air filter housing to the Throttle body. There's going to be a two wire harness. It may even be on the air filter housing on the throttle body side. Good luck and hope this helps.

Jun 15, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2009 Ford Escape Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...