Question about 1989 Mitsubishi Mighty Max

1 Answer

1994 Mitsubishi 2.4 pickup....timing

My husband is trying to find out where the timing, or what are the timing marks for the timing belt?

Posted by on

  • 1 more comment 
  • angel_1995_2 Apr 23, 2009

    My husband is replacing a timing belt on a 1994 Mitsubishi Mighty Max, and he was wondering if someone knew where the timing marks are? He said he just needs to know how it times?

  • yadayada
    yadayada May 11, 2010

    take a run down to the public library and see if they have a manual, also you can pay for this info at alldata.com

    I don't have the info you need and you most likely need it now, correct?

  • yadayada
    yadayada May 11, 2010

    Before changing any timing belt, it is recommended that you first line up the crankshaft timing and the camshaft timing. To get both aligned, you have to rotate the cranshaft twice. After rotating the crankshaft, align the mark to "0". Take note of any other markings and then you cane begin to disassemble the timing belt. It would be a great help if you can get some cam locking tool to hold the cam in place if you have a DOHC engine

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/mitsubishi/model/pickup/1994_mitsubishi_pickup_timing_belt_diagram_marks.htm

Posted on Mar 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 yota pickup V6. Timing belt failed, replaced it, now it's running rough and lacks power. Ideas?


The engine is a free running type so bent valves should not be the problem. Recheck the timing marks on the camshafts and crankshaft. If you are one timing belt tooth off, the engine could run but run rough. With the number 1 cylinder piston at top dead center, the camshaft marks should be lined up with their "TDC" marks and the crankshaft mark should be at 0 deg.

If the distributor was removed during the belt replacement, make sure it is in time with the crankshaft timing mark. When the No. 1 cylinder piston is at top dead center, the crankshaft timing mark should be on 0 deg. and the distributor rotor should be pointing to the number 1 terminal on the distributor cap at the same time.

Mar 10, 2011 | 1994 Toyota Pickup

1 Answer

Hi im doing the timing on a 1994 mitsibishi lancer runing a 4g91 engin and am unsure wich timing marks to line the crank pully up with?


Dont even think of putting the belt on unless you have the correct timing marks for the engine check out the mitsubishi forums for technical info

May 30, 2010 | Mitsubishi Lancer Cars & Trucks

1 Answer

I am trying to replace the timing belt on my 1994 Mitsubishi


subscribe to ALL DATA , you can get all info for your car, for about $20.00 a year.
this would be the best for you , before you ruined your engine.

May 04, 2010 | 1994 Mitsubishi Montero

1 Answer

Hi I am replacing the timing belt, water pump


I hope this is the one.

http://www.2carpros.com/forum/1995-mitsubishi-galant--timing-belt-vt374817.html

Mar 14, 2010 | 1994 Mitsubishi Galant

1 Answer

What is the timing setting the truck pops when you excelorate,do you use a timing gun or line up the gears


Line Up the Gears.

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1994 Isuzu Pickup. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/isuzu/model/pickup/1994_isuzu_pickup_timing_belt_diagram_marks.htm

Nov 10, 2009 | 1994 Isuzu Pickup

1 Answer

I have installed a new timeing belt and the small belt as well on my 1994 2 litre petrol sohc L300 mitsubishi van i aligned the cam sprocket mark with the top mark inside the cover the crank paint mark did...


It's been a while since I've done a Mitzi. Main belt on crankshaft pulley (should be the biggest) another belt for power steer / A/C - tensioner ok? Although that wouldn't make it run like a old dog. Should be straight forward, locate each of the marks all in line with --> & ....t's. Have you done a timing light check? Good luck hope that adds a little more to think about.

Jun 23, 2009 | Mitsubishi Minivan Cars & Trucks

1 Answer

Timing belt needs changed


if I had engine number I could supply details,this is the eng model number that is usually on a tag the size of cig pkt,situated in the firewall or inside of bonnet,others are on door pillar. Failing that strip down to the cambelt,see if you can identify marks on cam,crank sprockets and corresponding marks that they align to on block and head.it's good to paint mark the old belt to those marks so you can transfer those to the new belt,it will make timing easier as you have 2 self checks measures. nb:most belts have engine rotation direction printed on it. make sure that idler,tensioner pulleys arent noisey, if model has a silicone tensioner,these are more difficult to set if tensioner pulley swivels to tension...so to give more precise info i will really need engine spec/model no. IMPORTANT:when belt on,timed and tensioned,turn over in direction of engine crank 2 complete revolutions of crank pulley-that is 4 rotations of cam(s).all marks should be aligned(sprockets and marks)not always paint marks on belt though.if not aligned patience needed more than bent valves.

May 26, 2009 | 1994 Isuzu Pickup

1 Answer

I need to find a timing belt diagram for a 1994 mitsubishi galant


Your car will have the 2.4L SOHC engine in it (AKA 4G64). This manual will show you how to replace the timing belt (and more). Timing belt procedures start on page 33.

http://www.scribd.com/doc/4570538/Mitsubishi-4G63-4G64-Engine

(P.S. this manual also includes the 4G63 engine, you can identify your engine by looking at the procedures for the Single OverHead Cam[or SOHC])

Apr 06, 2009 | 1994 Mitsubishi Galant

1 Answer

Follow up on previous question,timing belt Mitsubishi Nimbus 1994


due head cams before removing the belt you use a lock you can make one even out of bit of wood or a metal plate its just to stop the timing marks from moving. take the belt off and before putting the belt on get the cogs in the markings and lock them with the wood or the metal plate. but make sure you have another room to put the belt on. as an rule when the belt is on turn engine by crank with spinner one full rotation to make sure the timing is right before starting each time you turn the timing lines should all match up even on the adjuster if not adjust and do it again till its all lined up.

Jun 28, 2017 | Mitsubishi Passenger Cars & Trucks

1 Answer

Timing belt on a Mitsubishi Nimbus 1994


Make sure you mark cam and crankshaft pulleys with at least two marks on each one.
Also put marks on engine to keep them all lined up.
I use either tippex correction fluid or white paint.

Jan 19, 2009 | Mitsubishi Passenger Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

1,399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...