Question about 1996 Chevrolet Blazer

Open Question

2008 escape rear window pops open by itself - 1996 Chevrolet Blazer

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Repair dents in 2008 Escape XLS PAssenger side rear panel

The creased one has to be hammered out some and filled. The other can be popped out as long as it is not next to the crease. It may need filled some also.

Sep 03, 2016 | 2008 Ford Escape

2 Answers

2008 ford escape. removal of rear bumper cover

Pop the Hatchback open and remove the connectors
from the top of the bumper cover.

Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.

Using Torx Bits, remove the inner rear wheel well

Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.

Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.

Good Luck

Feb 27, 2015 | 2008 Ford Escape

1 Answer

How to repair rear actuator for ford escape hatch

Bad lock actuator: (NOTE: If your hatch is locked)
First remove rear panel- pull the plastic panel at the top center, until (2)clips pop off, then pop (2) more clips at the mid-center. Stick your arm down until you reach the lock, with your fingers, feel for the squishy plastic( inside is the bar that goes up to unlock), it is attached to the lever to unlock. Pull up the lever until you can open the hatch. There are four more clips at the top sides and middle sides, and four plastic screws at the bottom which is only accessible when the hatch is opened.
The lock is only sold as an assembly at $100.
Part Number #9L8Z-7843150 B

Apr 11, 2013 | 2010 Ford Escape XLT

1 Answer

Does the rear lift door latch on a 2008 ford escape have a fuse

No the rear door latch is not electric....but does have a electric lock which is fuse 17 in the inside fuse panel....not the one under the hood. The rear lift glass is controlled by electric and is in the same circuit fuse 17. Good Luck

Nov 04, 2012 | 2008 Ford Escape

1 Answer

How do i replace a cigar lighter 2006 ford escape

not sure on the model of your car but most lighter are installed the same way. you will need to gain acess to the rear of the lighter, you may need to remove panels to get to rear, then you will need to remove power connection to lighter. this will be a plug that slides off, and then theres a nut that screws onto the rear of the lighter socket you will unscrew it as you hold the front off the lighter. the other style would be pop in, this is where theres no nut but rather it pops in and locks,

Dec 03, 2011 | 2006 Ford Escape

1 Answer

The glass lift gate on my 2008 Ford Escape keeps popping open whenever it wants. What is wrong with it?

you either have a weak latching device or a misaligned striker that strikes the latch which will catch it and keeps it closed securely

Jan 24, 2010 | 2008 Ford Escape

1 Answer

My 2008 g6 trunk pops open by itself

is the button stuck or check the ajustment on the trunk latch to make sure its locking all the way

Jan 11, 2010 | 2008 Pontiac G6 Sedan

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides