Question about 2011 Chevrolet Cruze

Open Question

Chevy s10 slim jim locksmith memberships - 2011 Chevrolet Cruze

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: how to use slim jim

ok well first off do you know anyone that has a truck close to the same year if so try using there key it should work to open your door and on how to use a slim jim depends on if you have power locks or not if so it's a bit harder than if you don't but you put it between the window and the rubber seal and slip it under the door locking bar ether up and forword or back if its a manual lock and if not you haft to move the slim about 2 to 5 inches from the lock and do the same good luck

Posted on Apr 19, 2009

  • 84 Answers

SOURCE: lock keys in 01 chevy s10. will a slim jim

not unless your really good at it, get a wooden wedge and pry the top corner of your door open enough to get a wire in to pop the lock. it wont hurt your door

Posted on Oct 26, 2009

  • 75822 Answers

SOURCE: locked keys in a chevy colorado, manual locks can

yes it can be opened with a slim jim, but it is not that easy, u really need to know where to put the toll and how to move it, a locksmith can do it quickly

Posted on Dec 17, 2009

  • 13 Answers

SOURCE: how to unlock car door with electric locks with

You will need to carefully pry the door back and hit the unlock button with a coat hanger.

Use nylon or other soft wedges to hold the gap while fishing the hanger through.

Easier than most methods.

Posted on Dec 21, 2009

  • 1098 Answers

SOURCE: Keys stuck in 2002 Chevy Silverado 1500.

Might work!!!! get under the front end and try to pull the bonnet release cable when open take the live off the battery and keep arking it off the battery may open the doors if central locking.

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to open a 1993 Chevy S10 truck with a slim jim

Stick a letter opener in the door about 1/8 to 1/4 way in and slowly turn to unlock not kidding it works for a lot of Chevy's just not the ignition....Hope that helped....

Apr 15, 2017 | 1993 Chevrolet S-10 Blazer

1 Answer

I locked keys in car, still in the ignition of my 2010 Chevy Malibu. Where should I place the slim Jim to unlock door.

Best bet is to call a lock smith and have him get in the car for you. Later model cars are designed to prevent slim jim from working in mast cases. The cost of the locksmith will be small compared to the possible damage and having to replace broken window, linkage or wiring in the door.

Oct 11, 2014 | Cars & Trucks

1 Answer

Use slim Jim unlock 2010 toy. Camry le

As your windows usually are slim jim resistant so its more prudent to get locksmith to open and could make new set of lost keys using vin number, make, model, year.

May 06, 2014 | Toyota Camry Cars & Trucks

1 Answer

How to unlock a 1983 chevy blazer without a key?

Use a Slim-Jim opening tool. Depending on the weather stripping, it may also be possible to use a coat hanger to grab the inner door handle and pull it open.

Use your Autoclub memberships, Insurance company memberships to get help. A locksmith has MASTER keys to fit in the doorlocks. The Locksmith comes out with a box of Masters for GM trucks and inserts them one-byone into the doorlock until he finds the right one.

Jan 23, 2012 | 1983 Chevrolet Blazer

1 Answer

I locked my keys in my 1999 chevy cavalier, I want to know if I can use a slim jim on it to unlock the doors

if you know what it is that you are trying to grab inside the door with a slim jim then 'yes' it is possible to open the car this way. but if you have never slim jim'ed this type of car before then it is best to have a locksmith come out and do it proper. there is a chance that you could knock off a linkage rod and make this situation even worse.
but if you want to give it a try then I will try my best to tell you what it is that you are looking for inside the door. near the back of the door where the door latch is located,, you are trying to grab onto the inside linkage control tab that is on the latch itself,,, with the slim jim you should feel a spongy feeling while pushing down,, at that point slide the slim jim in alittle and twist and then lift up --- this should unlock the car.
now there is another way of attacking this door,, but you will need to use a heavy wire bent like a 'L' and at the bottom of the 'L' you make a small hook to grab onto the inside control linkage rod ( inside the door ) --- you will need the heavy wire,a propane torch ( to bend the wire ) and two small wooden wedges to wedge the window away from the door skin. if you have your tool made ,, go about mid way to the front of the door and lower tool into the door about 7 inches and try and hook the linkage -- watch the inside lock control for movement while you fish for it,, grab it and move it backwards -- this will unlock the door.
'if you do try to slim jim the car - I would recommend trying the passenger side door so if anything does happen to one of the linkage rods, then it will not affect the drivers door.
I know that this all sounds kinda tuff and time consuming -- and it is,,, that is why I would still say to call a locksmith and have them come out to the car and pop it open for you,, they will be there in about 20 minutes -- it will take them 2 minutes to open the car and the cost will be about 45 to 55 dollars for this service. now you can also call a taxi service or a tow truck service and they might do it slightly cheaper then the locksmith company -- but they are far from qualified to do the job ( but they can get it open cheap -- ) -- I would stick with the skilled locksmith ...


Feb 04, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer


It is possible, but be aware that a slim jim is considered a burglary tool, making it illegal to have unless your a locksmith, a police officer or in most cases tow truck driver. Your best bet is to call your local police and explain your situation. Most police will open the door for you.

Sep 18, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

Lock keys in 01 chevy s10. will a slim jim work?

not unless your really good at it, get a wooden wedge and pry the top corner of your door open enough to get a wire in to pop the lock. it wont hurt your door

Oct 25, 2009 | 2004 Chevrolet Cavalier

1 Answer

Door locks

call a locksmith and ask. some require a specially designed tool similar to a slim jim, that a slim jim will not open.

Oct 14, 2008 | 2000 Mitsubishi Galant

2 Answers

I am locked out of my 1992 chevy silverado pickup. what is the easiest way to unlock the doors?

we tried a slim jim actually two slim jims and finally called a locksmith. he opened it in about a minute, tops and removed the two stuck slim jims for us. cost $50.00. this model of truck lock is tricky and easy to screw up.

Jul 30, 2008 | 2004 Chevrolet Monte Carlo

Not finding what you are looking for?
2011 Chevrolet Cruze Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides