Question about Chevrolet Cars & Trucks

1 Answer

My s10 truck back lights work perfectly fine but when I touch my break, my right side doesn't come on now what do I do about that?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,250 Answers

Look for a ground problem at the right side
you could use a jumper to a good ground to test the right rear back up light

hope it helps

Posted on Oct 12, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keithheavili
  • 410 Answers

SOURCE: Break lights are not working on my 2001 ford expedition

You need to replace your brake light switch which is located on your brake pedal. The reason that the right and left are out and the middle isn't is because there are two sides to the switch for vehicles with three brakes lights. It is a very easy part to replace and is relatively inexpensive. Change that switch out and you will be good to go. Let me know if you have any other questions. Thanks for rating my response and for using FixYa!

Posted on Jul 19, 2009

  • 206 Answers

SOURCE: I hooked up my trailer and the lights on the right

Sounds like a bad ground

Posted on Dec 27, 2009

  • 244 Answers

SOURCE: 2006 3500 4x4 tow package plug on back of truck

Test plug again, this time try with marker lights on and signals flashingand see what you have for power now. The exposed pronge is ground,( if this is the plug l'm thinking of.)

Posted on Apr 27, 2010

  • 2 Answers

SOURCE: my 2008 dodge charger breacks

check the sockets and wires for shorts or breaks in the cable.

Posted on Aug 24, 2011

  • 27 Answers

SOURCE: My 88 s10 tail light works, but my blinker and

take the taillight cover off and check the bulbs carefully. if yours is the type that has the long one piece bar that holds the bulbs it's probably bad. they're about $25 at O'rielly's

Posted on Jan 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy S10 4x4 passenger rear turn signal and break light not working


I would try measuring for 12 volts at the socket while the turn signal is on.

May 11, 2017 | 1998 Chevrolet S-10 Pickup

1 Answer

S10 pick up back cab break light not functioning


The break light bulb on the back of the cab goes out a lot. Just remove the lens and replace the bulb. Get the bulb from the dealer ONLY! All other bulbs burn too hot and will melt the lens.

Apr 30, 2014 | 2001 Chevrolet S-10

1 Answer

My 88 s10 tail light works, but my blinker and break light won't work. Only on the right side of the truck


take the taillight cover off and check the bulbs carefully. if yours is the type that has the long one piece bar that holds the bulbs it's probably bad. they're about $25 at O'rielly's

Jan 30, 2012 | 1988 Chevrolet S-10

1 Answer

'88 Chevy S10 pickup with flashers working only on driver side. Hazards work fine so I was told to replace the flasher relay. Does that sound reasonable and if so where is the relay located? If not,...


logically NO. if flashers work on one side, doesn't that tell you its OK? the flasher doesn't know left or right. what do you mean be "not working"? I would suspect the turn signal switch.

Sep 16, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

All the signal lights work in my 1999 chev s10 but the park light on the rear driver's side is out. I replaced the three bulbs and still no success. Any suggestions?


If you have a test light, check the wire going to that light, if it lights, the bulb socket might be bad.
If it doesn't light, trace the wire for a break os short.

Sep 07, 2011 | 1993 Chevrolet S-10

1 Answer

My 2008 dodge charger breacks lights doesn't work and my back right side marker either


check the sockets and wires for shorts or breaks in the cable.

Aug 24, 2011 | 2008 Dodge Charger

1 Answer

1998 PONTIAC SUNFIRE, WHEN TURNING ON HIGH BEAMS, PASSENGER SIDE LIGHT SHUTS OFF COMPLETELY, CHANGED BOTH LAMPS. STILL SAME PROBLEM IS IT THE HARNESS... LOW BEAMS WORK FINE


Could be the harness, the wires tend to break right at the back of the plug. First pull the light out and use a paper clip or some comparable and reach in the plug and bend the tabs a little, they heat up and will move, this will cause a no contact to the bulb wires. This fixes the problem about 50% of the time. If this doesn't do it , then I believe you can get these sockets at the parts store.

Jul 19, 2011 | 1998 Pontiac Sunfire

1 Answer

2006 3500 4x4 tow package plug on back of truck


Test plug again, this time try with marker lights on and signals flashingand see what you have for power now. The exposed pronge is ground,( if this is the plug l'm thinking of.)

Apr 27, 2010 | 2006 Dodge Ram 3500 Truck

1 Answer

1998 S10 rear break lights and blinkers do not work.


GROUND WIRE ON FRAMERAIL Behind Driver side REAR WHEEL << They Have A BAD TRACK RECORD,, They LOOSE CONTACT and Cause this Problem

Nov 02, 2009 | 1999 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...