Question about Chrysler Aspen

Open Question

Replace ball joint on a Chrysler aspen - Aspen Chrysler Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: front upper ball joint replacement

The dealer's answer (if you are interested).......

The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it will require replacement of the entire upper control arm.

Sorry.

Posted on Jun 20, 2008

Ad
  • 51 Answers

SOURCE: replace ball joints

Remove in this order: wheel, loosen the 4 lower ball joint set bolts, cotter pin and nut from tie rod, tie rod from ball joint bracket, ball joint from lower control arm, 4 lower ball joint set bolts, ball joint from suspension. Install is reverse but don't tighten the 4 lower ball joint set bolts.

torque is as follows:
ball joint to control arm- 112 ft-lbs
Tie rod nut- 67 ft-lbs
lower ball joint set bolts- 83 ft-lbs
remember to use a new cotter pin

Posted on Oct 08, 2008

shawnsz
  • 64 Answers

SOURCE: lower ball joint replacement 2003 GMC Sierra 2WD

You have to drill them out, it can be a real pain to.

Posted on Feb 19, 2009

  • 408 Answers

SOURCE: replace lower ball joints

if you have some mechanical knowledge, it is not really difficult.  It is just time consuming.  Pick up a Haynes manual and they will give you a step by step with pics in doing this.

Posted on Mar 07, 2009

chrisK1997
  • 103 Answers

SOURCE: 2000 lincoln ls bad ball joints! should i replace whole knuckle or just ball joints

yes you can buy just the ball joints

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace lower ball joint on a 2006 chrysler 300c?


This is not a do it at home repair. If the ball joint is replaceable, you will need a special press to remove/ install it. In some cases the ball joint is non replaceable and the entire control arm will be required. Have a pro do it at a shop

Aug 05, 2015 | Chrysler Cars & Trucks

1 Answer

How do I replace the right ball joint on a 2000 Chrysler Town and Country?


If you want to take the easy route use the dorman-control-arm- 520-344. It cost about as twice as much as a ball joint by itself but you will not need any special tools to replace. If you just do the ball joint by itself you will need a ball joint tool to press the old one out and the new one in. Some parts store do offer free tool borrowing programs so its you call

Feb 02, 2015 | Chrysler Cars & Trucks

1 Answer

Upper ball joint repair cost with labor


Labor rates are different in other locations. the average labor rate where I am is 68.88 an hour. Your ball joint replacement says it takes 2.3 hours to do. the ball joint itself is around 50 - 60 bucks. you can figure the math when you find out what the shop you are going to use's labor rates are. I hope this helps and good luck.

Feb 06, 2011 | 1998 Chrysler Cirrus

1 Answer

My tires are wearing on the inside like my last car i replaced the outer tie rod ends and ball joints. But on my chrysler 300 2002 model ther looks to be more parts that look like ball joints than just one...


Your toe-in is off. Maybe tie rod ends or may just need alignment. If you take it for alignment, they will tell you if any joints are worn out.

Aug 27, 2010 | 2002 Chrysler 300M

1 Answer

Need to replace the lower ball joints in my 2002 Dodge Durango SXT. Receiving conflicting advise. Some say that I have to replace the whole control arm with new ball joint. Others say that I can press the...


It looks like if you buy the joint from Chrysler then it comes complete with the arm however there are aftermarket companies that make just the ball joint which can be pressed in and out. It's fairly common for a manufacturer to offer the joint only as a part of the arm while an aftermarket company will offer the ball joint for sale seperately. A hint on these: Buy the best quality ball joint you can get an grease them on a regular basis. Lower ball joints take quite a beating and there is a big quality difference between cheap and good joints.

Jun 16, 2010 | 2002 Dodge Durango

1 Answer

2001 Sebring Sedan LX, 2.7l V-6, VIN Code U Lower balljoints: Can the front left and right lower ball joints be pressed into or out of the lower control arms on this vehicle? I'm being told by my mechanic...


Sounds odd... Rikkalan,

(but it appears AMAZON agrees with your mechanic)

Just go to ROCKAUTO and look up your parts...

If the entire arm needs to be replaced the separate ball-joint will not be listed...

Hope this helps!!
RockAuto Parts Catalog


2001 CHRYSLER SEBRING 2 4L L4 DOHC Ball Joint RockAuto

Mar 03, 2017 | 2001 Chrysler Sebring

1 Answer

04 CHRYSLER SEBRING REAER BALL JOINT


it is part of the control arm simply unbolt the arm and remove it

Feb 03, 2009 | 2004 Chrysler Sebring

1 Answer

Instructions needed--To help me replace my CV joint and my Ball Joints


the ball joints arent hard to do at all all you have to do is take the front tires off and you will see the ball joints as soon as you do this. then there is a nut on the bottom of the ball joint, remove it. then where the ball joint assembly connects to the tie rod mark where the end of the nut is with a sharpie. then loosen the compression nut that holds the ball joint then use a large wrench to loosen the ball joint assembly. then take off the old ball joint and replace it wit the new one lining up the backside of the compression nut with the mark you made with the marker then tighten. then put the bolt on the bottom of the ball joint assembly back in to the hole where you removed it then tighten snugly and put your tire back on and you are finished and then do the same on the other side

Oct 24, 2008 | 1994 Chrysler Concorde

4 Answers

Front upper ball joint replacement


The dealer's answer (if you are interested).......

The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it will require replacement of the entire upper control arm.

Sorry.

Jun 19, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...