Question about Ford Festiva

1 Answer

Engine light on more vibrations than normal.

Enigne warning light came on during a long drive stays on but flashes,also more vibration than ive noticed before,check all levels and doesnt seem to be no leaks,make is 2004 fiesta zetec

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Check tires and air pressure.602-909-6450 Message
collisionrepairadvice.com
Mechanical Repairs in your area. Diy's, collision repair advice, Mechanical, Technical, insurance, What you should know! How to save money on repairs, recalls, service bulletins, 40-60% off Mechanical repairs in your area. Dentless Repairs in your area. Paint repairs in your area at better rates. Come check it out

Posted on Apr 23, 2009

  • Norah Chandler
    Norah Chandler May 09, 2014

    It sounds like this is a circumstance where you need a professional mechanic to help you with your problem. A mechanic should be able to diagnose the problem and give you ideas for fixing it. Did the problems just randomly start, or were you recently in an accident? Norah Chandler| http://www.cbsautotech.com/autobody_repa...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have mitsubishi Pajero 2003 which I bought second hand. my veihcle vibrates badley, I feel the viration around 50 kpm and it gets worse over 100 kpm. I feel bad vibration under my seat as well as on the...


Take the car in for a front end inspection. Also get tires balanced, tires out of balance can cause I really bad vibration.

For the Orange Light?? I am guessing its a Engine light, it will require to be scanned to find out why it shows up.

Aug 12, 2013 | 1995 Ford F150 Styleside Regular Cab

1 Answer

I have a Pontiac gxp 2006 and as i was driving home the check engine light flashed and then stayed on. There is also a vibration when accelerating. Any ideas? Please and thank you!


Check engine light can come on for 200 reasons. Is the vibration coming from the front? Under hood? loss of power? Any noise? More info please

Jan 08, 2013 | Cars & Trucks

1 Answer

Problems with Mercury Sable 04/ stalls, engine light stays on


Could be crank shaft sensor, plus fuel filter tune up plugs and wires, go to auto zone check light it is free.

Jul 22, 2017 | 2004 Mercury Sable

2 Answers

Severe vibration and knocking sound!


sounds more like a ujoint or a center support for the drive shaft. also check and make sure that the flywheel bolts have not come loose. also check the harmonic balancer and make sure it is not seperating

Aug 23, 2009 | 1996 Ford Explorer

1 Answer

During driving the transmission switches to neutral (Lexus RX300)


Your tranny need to be repaired at once. The tranny is slipping. Some Lexus owners do have the similar problem including myself.

May 18, 2009 | 2002 Lexus RX 300

2 Answers

1996 dodge grand caravan vibration 45 mph to 55 mph replaced right front axel still same problem vibration no felt in steering


Vibrations while driving like you are describing can come from tires that have defects (internally broken belts) (wheel weights that have fallen off) or a bent rim (perhaps from another driver [not you :-) ] hitting a curb) Are the tires worn? Have they been balanced and rotated regularly? You report no vibration in the steering wheel.
Vibrations during braking can be warped rotors or discs (but this doesn't sound like your problem since these kind are usually felt in the steering wheel during braking).
If and only if you feel like you can do this safely,
you can try getting the car up to 55, placing the car in neutral, then switching the "engine off" but leave the "key on" (be warned the power steering will go out but the vehicle can still be steered though the steering wheel will be much stiffer) if you try this (do it perhaps in a vacant parking lot or on an empty road) and the vibration goes away with the engine off but while the vehicle is still moving, then the vibration is engine or transmission related. If this is the case you might hope for maybe a bad engine mount. Bad engine mounts can be diagnosed with the vehicle stopped as well. However, if the vibration remains with the van moving forward but with the engine off, the vibration is likely a problem with the tires or suspension. Try to provide some more info.
If you don't feel comfortable trying the above suggestion, please take the vehicle in to an ASE certified suspension and steering professional for further diagnosis.

Finally, I had a similar situation happen to me today. I was riding with a friend in their van and the vehicle started vibrating more and more around 55 mph. We stopped and carefully checked the front tires (including the lug nuts for tightness) but
found a tire defect. (it had several broken steel belts that caused a bulge in the tire and thus the vibration) We changed the tire and the vibration was gone. Good luck to you.

May 08, 2009 | 1996 Dodge Grand Caravan

2 Answers

97 Lumina dash warning lights stay on


For the security light you need to replace the ignition lock cylinder or bypass the security system. For the other two, you need to have the car scanned to see what codes are in the ecm and the abs module.

Mar 19, 2009 | 1997 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...