Question about Cars & Trucks
If the remote worked before, the first thing to try would be to reprogram the remote to the truck. Manuals are available online if you don't have one. Another problem could be a bad remote, try a second if you have one. Also be sure wiring is intact and no fuses are blown.
Posted on Oct 18, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
do the lights come on in the front if its just a little red light its possible you tripped the security on the van . or is it the batery light flashing and the battery is dead
Posted on Feb 21, 2009
SOURCE: 1998 Dodge Ram 1500 won't start
still sounds like the timing belt/chain to me,especially since it just shut off goin down the road, had a 93 that did the same thing,dodge has a kind of safety switch that if the timing belt breaks the engine will shut down to keep you from tearing anything else up.
Posted on Mar 06, 2009
your battery may check out fine, being 5.9 liter take a big amperage to turn that starter over 12volt does not mean a thing, amperage is what count. Every auto part store they sell many types of battery and they all 12V but different amperage. Your battery may check out 12V but amperage may have gotten weak. Check all your negative ground that you have good contact to body chassis. You can also try to get a jump from other truck (friends) that has a higher or same amperage as yours to see if it turn over. using jumper cables connect positive cable straight to your positive post and the negative directly to your motor metal ground and see that will also assist the amperage to turn over that starter. This way we can truly eliminate the battery if it does not start. If that don't work than its you ground connections or positive contact. check both positive and negative cables from your battery making sure the wires is good. Inspect the ground wire to your starter making sure it has good contact. Oil and rust will make give a bad contact. If your hear the serenoid clicking when the key is turn over and you can hear the starter making a strong clicking noise to the flywheel but not able to turn your fly wheel, and we try to jump with addition battery increasing the amperage along with good starter, all the gound wires check out, chances are your motor may be lock up. The only way to check if your motor/flywheel is lock up, take all the spark plugs out that way it will reduce your compression, take a big close end box wrench and put it on the main crank pulley and try to turn the main crank pulley over by hand. Go from there and re-post and let us know, one of us will try to continue to walk you through it.
Posted on Sep 08, 2009
SOURCE: factory remote starter on my
there should be a red reset button under kick panel on driver side press in for 30 sec and release, that should take car of problem , also could be mount on dash on driver
Posted on Nov 16, 2010
Testimonial: "thanks have not found the reset yet , thanks"
Tips for a great answer:
Dec 04, 2015 | 2012 Kia Sorento Base 4dr SUV 2.4L 4-cyl....
Feb 18, 2013 | 2005 Dodge Ram 1500
Jan 10, 2013 | 1998 Dodge Ram 1500 4WD
Jun 04, 2012 | 2004 Dodge Ram 1500
Apr 05, 2010 | 2006 Dodge Ram 1500
Aug 23, 2009 | 2004 Dodge Ram 1500
May 06, 2009 | 2006 Dodge Ram 1500
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: