Question about 2007 Ford Mustang GT California Special Convertible

Open Question

Loose side view mirror housing - 2007 mustang

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 194 Answers

SOURCE: Need to replace passenger side rear view mirror.

on the iside of the door theres a plastic cover it just pops off so you can take off the nuts

Posted on Feb 05, 2010

Ad
betz73
  • 298 Answers

SOURCE: SOMEONE RIP OFF THE SIDE VIEW MIRROR AND NOW THE WINDOW DON'T WORK

Check your window fuses. If they are good then you have a loose connection inside the door.

Posted on Oct 01, 2008

  • 63 Answers

SOURCE: Some of the LED lights on the side view mirror of

Im Not Sure About The Disasembling Part But The Led Lights Are A Single Unit To Fix The Bulbs That Are Out you Will Have To Change The Whole Light Assembly in Most Cases

Posted on Jul 16, 2009

  • 1986 Answers

SOURCE: how to install passenger side view mirror Ford

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

kennyz195
  • 61 Answers

SOURCE: how do you remove the drivers side view mirror

remove the sail panel, clips in. remove the three nuts and the power connecter.

Posted on Apr 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tighten side mirror


If the mirror housing is loose and nothing has hit it and broken the mounting to the door frame, yes. If it is the glass part that is loose and it is a electric or manual mirror, something has damaged it behind the glass replacing it will fix problem.

Dec 07, 2013 | 2007 Lincoln Mark LT

1 Answer

Loose screw rolling around in side view mirror assembly 1999 mazda miata


Usually the mirror is 'glued' to the moving parts of the inside. Most of the time one will need to remove the mirror and re-glue it back.

Feb 01, 2013 | 1999 Mazda MX-5 Miata

2 Answers

The drivers side rear view mirror is loose. How can I tighten it down?


Put a sheet metal screw between the mirror and mirror body below the mirror. This will allow the mirror to still break free and swing if you hit something kinda hard, but will keep it from moving freely. There is no other way to tighten it. It's just a case of the spring becoming fatigued.
97ab98f.jpg

Jul 03, 2010 | 2002 Jeep Grand Cherokee

1 Answer

How do you replace the exterior mirror glass on a 2007 chevy tahoe. I have the the replacement glass portion but not sure how to release the broken portion from the mirror motor. Thanks for any info!


i just replaced the passenger side on mine and this is what i did.

1. on the back side of the mirror housing is a half moon shaped plastic piece. gently remove that from the housing, exposing a portion of the back side of the mirror.

2. disconnect the two wires (remember rt and lf). carefully, with a pry tool, apply pressure on the center of the back side of the mirror, it will pop loose.

3. once the mirror is off there should be a round plastic piece attached to the back side of the mirror. on the passenger side there is a tab in the upper left side. lift up on the tab and slide the plastic piece down...it should slide off.

4. once you have the plastic piece off it goes on the back of the new mirror in the opposite way. you line up the four cross tabs and slide the mirror up until the tab grabs it.

5. put the mirror back in the housing by lining the circle (on back side center of mirror plate) with the center of the mirror housing. genlty apply pressure on the center of the mirror (i had to hit it firmly with the palm of my hand) unitl it snaps into place.

6. once it snaps into place you can reconnect the two wires to the back of the mirror and install the back side plastic housing......DONE

Mar 20, 2010 | 2007 Chevrolet Tahoe

1 Answer

How to replace right side view mirror on a 2007


HOW DO YOU REPLACE OUTSIDE MIRROR ON 99 CHRYSLER

Feb 21, 2010 | 2005 Chrysler 300

1 Answer

Fix 2002 buick rendezvous side view mirror


it sounds like the mounting bolts embedded in the mirros housing were pulled out somewhat.You will not know untill the mirror is removed. If the studs that hold this mirror housing to the door are pulled out take a heat gun to get the studs warm and twist them back in flush. them apply JB Weld to the studs lowest part to the mirror housing so they stay secured

Feb 06, 2010 | 2002 Buick Rendezvous

1 Answer

The glass in the driver side rear view mirror is loose. how do you tighten it up?


The driver and passenger side mirrors have a small rubber plug in the bottom center of the mirror housing. Remove the plug and there is a phillips head screw holding the mirror assembly. Tighten this screw about 1/8 turn and it will keep the mirror from moving around. If you remove the screw you can remove the mirror and drive motors. Use a bit of thread-lock to keep the screw from loosing again. Reinstall the rubber plug.

Jan 30, 2010 | 1991 Toyota Previa

2 Answers

I have a 2007 dodge grand caravan. I am replacing


the plug is inside of the mirror housing once you take the old mirror out if you need to plug it after the housing and you replaced the whole mirror the plug is inside the door panel

Aug 28, 2009 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

Side Mirrors will adjust side to side but not up and down.


There are two tiny motors in each mirror. one for up/down. One for side to side. They have jack screws (plastic) that fit into the motors.

You can manually put your hands on either side of the mirror and force adjust it. If you hear a ratcheting sound, the jack screws are OK. Then repeat with hands on top and bottom.

If you hear ratcheting and mirror stays where you stop it, that means one of the motors is bad. The motor assembly is available as a separate part.

-------------------------------------------------------------------------------------
Mirror Motor—Crown Victoria, Grand Marquis
Removal and Installation
  1. Disconnect battery ground cable. Refer to Section 14-01 .
  1. Remove outside Rear View Mirror Glass as outlined.
  1. Remove Outside Rear View Mirror as outlined.
  1. Remove two screws from outside rear view mirror motor.
  1. Remove outside rear view mirror housing from outside rear view mirror base.
  1. Disconnect connector and remove outside rear view mirror motor from mirror housing.
  1. To install, reverse Removal procedure.
1a865db.gif
Might be cheaper to buy used irror at car-part.com. Look for * to find page with cheapest part. Or, EBay. Good luck

Aug 11, 2008 | 1996 Ford Crown Victoria

1 Answer

How to replace the Passenger side Rear View Mirror on door.


there should be a plastic cover on the inside of the car where the mirror is take this off and there will be a connector block unplug this and there should be screws undo them and the whole thing should come off themn and you should be able to seperate them then.

Jul 13, 2008 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
2007 Ford Mustang GT California Special Convertible Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...