Question about 2006 Chevrolet Colorado

Open Question

2006 CHEVY COLORADO HAS CODE, P 0014 AND P 300 . WHAT IS THE FIX?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: how do i change out the knock sensor on a 2006 chevy colorado

You didn't list your engine size so please pick the applicable to your motor size:

Removal & Installation 2.8L & 2.9L Engines To Remove:

  1. Lift the vehicle high enough to gain access to the knock sensor (KS) through the left front wheelhouse.
  2. Remove the left front wheel and wheelhouse liner.
Knock sensor (KS) (A), Engine harness (B), Knock sensor (KS) connector (C)


e44e83f.gif
  1. Disconnect the knock sensor (KS) connector.
  2. Detach the knock sensor (KS) from the engine block.
To Install:
  1. Attach the knock sensor (KS) to the engine block.
    • Tighten the bolt to 18 ft lbs (25 Nm).
  2. Connect the knock sensor (KS) connector.
  3. Install the left front wheelhouse liner and wheel.
  4. Fully lower the vehicle.

Posted on Sep 03, 2009

Ad
  • 1 Answer

SOURCE: 2006 colorado intermittently fails to start. It

Clean all the electrical connections you can get to under the hood with automotive electronics cleaner,dry with compressed air and pack each connector with di-electric grease.

Posted on Nov 13, 2009

  • 599 Answers

SOURCE: chevy colorado code 420 and 496 whats the problem?

code 420= Catalyst system efficiency below threshold(bank 1) code 496=Evaporative emission system-high purge flow. Hope this helps if you need more help get back to me Thanks Ray

Posted on Feb 15, 2010

  • 1857 Answers

SOURCE: the following codes show up on my 2006 chevy

All these codes indicate that maybe you lost your reference signal from the computer. What someone will have to do is check fo voltage and grounds from the PCM on the coolant temp sensor, Both 02 sensor heater circuits, the evap purge solenoid and the gas tank pressure sensor. Its possble the computer failed or you poped a PCM fuse in the fuse box under the hood. The cover should have a legend to tell you which is which but I would pull all of them and inspect anyways.

Posted on Apr 20, 2010

  • 1 Answer

SOURCE: 2006 chevy colorado install brake shoes

how do you replace brake pads

Posted on Oct 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace camshaft postion actuator solenoid 2006 chevy impala


Have any codes ? Chevy Colorado P0017 Case Study Part 1 Doesn't matter if this is a Colorado . Same on impala VVT - variable valve timing .

Jul 02, 2016 | 2006 Chevrolet Chevrolet Impala LT

2 Answers

2006 cheevy colorado reduced powereduced power wont run 2006 chevy colorado pick up code 600 and 601


Those are communication and internal computer failures. You likely need a new PCM

Jan 01, 2015 | 2006 Chevrolet Colorado

1 Answer

My 2006 chevy colorado is making a clicking sound and won't turn over


Your Main Battery is Flat, get a jump start if its safe or remove the battery and hook it up to a charger. Maybe you left your lights on, or your alternator isnt charging the battery properly when your driving around. Sometimes this can be the bushes located in the alternator.

Apr 07, 2012 | 2006 Chevrolet Colorado

1 Answer

2006 colorado intermittently fails to start. It


Clean all the electrical connections you can get to under the hood with automotive electronics cleaner,dry with compressed air and pack each connector with di-electric grease.

Sep 30, 2009 | 2006 Chevrolet Colorado

1 Answer

Plugs on 3.5 Chevy Colorado


Have him go to The Local Auto Parts Store and Purchase a Haynes or Chilton Book on this Truck. Costs 25.00 But, will tell you how to fix ANYTHING that goes Wrong. You can get them also at their Websites.

Jan 15, 2009 | 2006 Chevrolet Colorado

Not finding what you are looking for?
2006 Chevrolet Colorado Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...