Question about 1992 Ford Festiva
There should be a black box under the hood that has the fuse inside of it.
Posted on Jan 10, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuel pump relay
I have found the relay at my local auto parts recycling center, after many hours of troubleshooting, I also found the PCM to be faulty. A replacement computer is on order. This model has been modified by prior owner removing the inertia safety switch. A replacement is also being sought. A similar problem occurs when the ECT (engine coolant temperature) sensor is destroyed.
Whatever you do, DO NOT REMOVE THE INERTIA SAFETY SWITCH. This does protect the fuel pump and related circuit. Also linked to the fuel pump circuit is the main relay, and the injectors.
If you find the thermo fan starting within seconds od rotating the engine, the problem is the main relay earth, PCM (needs replacement) and/or the fufel pump relay. This is known as LIMPO HOME MODE.
Posted on Sep 30, 2008
SOURCE: replace fuel pump
Fuel injection motors have in the tank fuel pump and screen .Access from under back seat,fold forward and move carpet forward after popping out plastic carpet retainer plugs.move floor plate,phillips screwdriver ,no need to unplug electric.remove gas hose,tuck forward out of way.unplug electric plug and remove screws from top of tank and gently pull up and tilt toward gas tank filler so that the gas gauge float and rod is not ruined.the plastic pickup screen will need to be folded to get out of tank.removing the float controll with small nuts is a good idea. the pump has a screw in the bottom that probably needs a vise grip if the phillips head rounds out. everthing is slip apart from this point.pay attention to plastic over the intake nipple and rubber o ring and piece up in the intake line.ebay has reasonable pumps.look at pictures and see the screen and plastic parts that you may need.the rubber on bottom of pump may need to be trimmed because of groove channel may have metal insert in your new pump. unless new one is with new pump.kind of tricky to put back together.but is do able .
Posted on Aug 29, 2009
The fuel pump relay is part of a large relay control unit called the IRCM (intagrated relay control module)
The module is about 6"x4"x2" and has gobs of wires (large retangular connector) coming out of it, the module is mounted on a bracket under the hood that is bolted to the top of the driver's side front strut tower, this module can be self tested by a dealer to see if it is bad, they seldom fail, I am a Ford dealer tech and have only replaced 2 in 20 years, Tempo does however have a fuel pump issue..
Posted on May 12, 2010
The pump should have a fuse in the fuse block. You need to check for power in the fuse block and you need to check power to the pump relay.
Sometimes there is a fusible link to the Relay. If you check the connector terminals for power where the Relay plugs in, you can determine if the fusible link has blown. You could have already replaced the bad parts and now need to restore power to the Relay.
Posted on Oct 10, 2010
Tips for a great answer:
Oct 11, 2013 | 1991 Ford Festiva
Oct 11, 2012 | 1991 Ford Festiva
Mar 08, 2011 | 1991 Ford Festiva
Oct 10, 2010 | 1991 Ford Festiva
Mar 25, 2010 | 1990 Ford Festiva
Jul 08, 2009 | 1990 Ford Festiva
Jun 07, 2009 | 1992 Ford Festiva
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: