Question about 2002 Chevrolet Silverado 1500

1 Answer

Need to change belt/belts, not sure if there is just one or two, this is a friends vehicle

Need to change the ac belt on a 2002 silverado 1500 is there a single serpentine belt or a seperate belt for ac

Posted by on

  • azbum1 Apr 23, 2009

    Thank you, this is a friends truck and she was not sure. I have changed many belts and will ask her to check the diagram under the hood.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,000 Answers

You should have a drive belt diagram under the hood somewhere above the radiator, fan shroud or possibly on the bottom side of the hood near the latch.
I could'nt find a diagram for your particular vehicle.
Hope this helps.

Posted on Apr 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Diagram of serpintine belt for 2002 chevy silverado 1500

When did GM stop putting a sticker under the hood with the accessory belt layout? I prefer Mopars,but I did like this idea.If changing a belt on my vehicles,I clean a spot of the radiator support,draw a diagram,and spray some clear paint over it.If you have to go through the trouble of finding a diagram,do this on your truck.

Oct 27, 2012 | Chevrolet 1500 Cars & Trucks

1 Answer

How do you know what size engine you have on a 2002 chevy silverado 1500 and what model it is ?

there is a sticker located under the hood either on the hood itself or on the radiator support with a belt routing diagram the engine size is usually listed there or also on the vehicle build tag onthe opening part of he driver front door

Feb 18, 2011 | 2002 Chevrolet Silverado 1500

2 Answers

2002 chevrolet silverado hard to steer

is the power steering belt broke?, if not make sure you have enough power steering fluid in it

Jan 09, 2011 | 2002 Chevrolet Silverado 1500

1 Answer

Changing serpentine belt on 2000 chevy silverado 1500 4.8 v8

The belt has tension applied to it from an idler pulley arm. you need to release tension by using a socket and ratchet on the nut on the idler pulley. Release tesion and slide belt off . Make sure you have the diagram for serpentine belt. it is usualy under the hood. If not make a diagram yorself before removing belt.

Aug 13, 2010 | 2000 Chevrolet Silverado 1500

2 Answers

Ac belt broke on 2000 silverado 5.3 they want $1500 to fix for a broken belt 124,433 miles

For $1500 i'm going to have to assume they are replacing more then just the serpentine belt. Did the A/C compressor seize causing the belt to break? If so, 1500 still seems a little high unless they are trying to get you to replace the other parts in the system. It's not out of the question to replace the receiver drier and the orifice tube when replacing the compressor but they are pretty accessible.

If i remember correctly the a/c belt only drives the A/c compressor. So, you could just leave the belt off with no other ill effects other then obviously having no A/C and less effective defrost.

Dec 04, 2009 | 2000 Chevrolet Silverado

1 Answer

Ac belt

Most likely you have a serpentine belt that hooks everything together. If so, there should be a diagram on a label underside of the hood, on the cowling for the radiator fan, or even on the framework holding the radiator in.

If not, and you don't have the operator manual handy, go to almost any auto parts shop and pick up a copy of a Haynes or Chilton service manual for your truck. There is a wealth of info there. Or, you could always go to your nearest library and copy the diagram and take it home.

Luck, Sirwriter

Jun 11, 2009 | 2002 Chevrolet Silverado 1500

1 Answer

Ac belt replacement

You must remove the fan belt first by wrenching the spring loaded tightener and the same must be done for the compressor belt.

Mar 15, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

How to put on new AC comressor belt

After you have removed both the ac belt over the pullys on the crank all the way to the inside so that the belt will go behind the pulley,then place the ac side on the ac compressor pulley.
know place the belt above the tensioner pully and place belt on crank pulley,then raise the tensioner with a wrench to where you can slide belt under the tensioner pulley and release the tensioner against belt,reinstall other belt as you removed it.

Please rate this solution

Jan 03, 2009 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides