Question about Renault Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: remove rear brake drums
1. After removing the wheel, remove the brake drum. 2. Remove the shoe hold down spring, the automatic adjuster spring and adjuster lever.
3. Spread the shoes and remove the shoe adjuster. 4. Remove the shoe to shoe spring and shoe hold down spring.
Posted on Jun 03, 2008
loosen emergency brake both sides..open wheel cylinder and let fluid run as you pry gently side to side in between drum adn shoe through backing plate /drum area to collapse the shoes some..... use wd40 or quality rust buster at center of drum /axle area to loosen grip of rust fused metal at hub to drum ..tap tap with hammmer around circumference of drum to dislodge adn loosen shoes from drum and drum from axle..good luck.. be patient work slowly
Posted on Nov 11, 2008
You should be able to just pull them off! If they are stuck on you may have to get them off by beating on them with a small sledge hammer. Sounds primitive, but thats how its done at the shop. Just hit it straight on the front to break the rust loose. Whatever you do...don't hit the wheel studs. They aren't fun to replace.
Posted on Jan 20, 2009
No just make sure your emergency cable is off and take a large hammer an hit it around the edge or corner lightly and spin at the same time also try pulling with your other hand as you spin this is a technique all mechanics use its very unlikely that you will have to loosen up the shoes with a brake spoon.REMEMBER THE OUTER ROUNDED EDGE ONLY WHERE ITS THE THICKIST.
Posted on Mar 23, 2009
jack up one side at a time without the ebrake on as that will engage only the rear brakes remove lugs and have a good hammer handy and tap on the drum until it will pull off
Posted on May 19, 2009
Tips for a great answer:
Nov 07, 2016 | Renault Kangoo Cars & Trucks
Feb 02, 2015 | Renault Cars & Trucks
Jul 05, 2014 | 2005 Renault Kangoo 1.5
Jun 30, 2014 | Cars & Trucks
Renault Kangoo (KC) 1.4 i car bodywork specifications: Renault Kangoo is a minivan with 5 seats and has 4 doors. Dimensions information of car: 3995 mm long, 1827 mm high, 1663 mm wide. Other Renault Kangoo (KC) 1.4 i cars specs: 2600 mm wheelbase, rear track has 1418 mm, front track has 1405 mm, ground clearance - 140 mm. Total car weight is 1155 kg and 1665 kg of maximum weight, cargo capacity (volume) if from 650 to 2600. Tires type for Renault Kangoo (KC) 1.4 i is 165/70 R14 T. Car engine specifications: 1390 cm3 displacement, located front, transverse with in-line cylinders, 75.8 mm bore. Renault Kangoo (KC) 1.4 i has 4 cylinders. More car engine information: 9.5 compression ratio, 77 mm stroke, car has 2 valves per cylinder, distributed injection fuel supply type, engine power 75/5500 hp, engine torque equals 114/4250.
Transmission specifications of Renault Kangoo (KC) 1.4 i wheel drive is front, it has 4 gears of automatic transmission,.
Renault Kangoo (KC) 1.4 i has wheel-rail type of steering. And hydraulic system power steering.
Rear brakes are drum brakes. Front brakes specs: ventilated disc brakes.
Performance Renault Kangoo car data: it takes 17.3 sec. for Renault Kangoo (KC) 1.4 i to get 100 km/h speed. 147 km/h is the max speed. Renault Kangoo gasoline tank has 50 liters capacity. The car consumps 9.5 liters in the city, 6.3 liters on the road.
Jun 28, 2014 | 2003 Renault Kangoo
May 05, 2014 | 2003 Renault Kangoo
Apr 07, 2009 | 2000 Renault 181
95 people viewed this question
Usually answered in minutes!