Question about 2000 Pontiac Grand Prix
My driver side window will not work it went down but now it will not go up
You could have a faulty switch or a broken wire at the switch. If your other power windows work fine then it's most likly going to be the switch.
Try moving the switch button from side to side as you hit the up button. The contacts at the switch could be bad and the electric motor not getting the signal to go up.
I believe Auto Zone or any parts store like Parts Saource would have the switch for you to replace it and can give you a how to do instructions on how to do the job.
Good luck and hope this helps.
Posted on Apr 23, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
When you push the button to raise the window, do you hear it humming or clicking, or is it dead silent? If it's silent, the motor isn't even trying to raise the window. That's either a blown fuse, a dead window regulator, or a dead window switch. If you hear it clicking or making noises, but not coming up, it's either the regulator is messed up (but not dead), or the window has come off it's guide tracks and can't raise up.
Posted on Aug 30, 2008
i had same problem on my jeep i disconnected the battery then reconnected everything worked fine after that
Posted on Nov 25, 2008
Hi Rachel . It sounds like the plug on the drivers window motor (Which is also the ecu for that door) has come off or is loose . This will stop the cdl working as well . Regards VW Audi tech
Posted on Jan 20, 2009
If you handy, you most likely can repair this yourself. I have had this happen on two of my Auroras. The window regulators have a nylon part that retains the cable assembly. This part gets brittle as the car ages (really under designed) and the cable end pulls through it.
I have been able to modify the retainer by removing the nylon cover and slicing a little notch to hold the end of the cable. Need a picture here to really show how it's done. In any case, a couple of hour labor and it's fixed for free.
Posted on Feb 02, 2009
Wire breaks inside the door on 99 durangos we have 1 and bro inlaw does as well same problem the wires go in the door and have a wire tie making them do a sharp switch back itll be there or where the wires rub opening and closing the door.
Posted on Jul 06, 2009
Tips for a great answer:
Jan 24, 2016 | Cars & Trucks
Nov 28, 2013 | Toyota Camry Cars & Trucks
Mar 30, 2013 | 1997 Ford Expedition
Aug 20, 2010 | 1999 Cadillac DeVille
Nov 14, 2009 | 2005 Volkswagen New Beetle
May 31, 2009 | 1999 Lincoln Town Car
Sep 27, 2008 | 2000 GMC Jimmy
282 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: