Question about Cars & Trucks
There are a number of reasons that the tire leans.You need to book into a suspension shop and get s tech to physically look at th acr to diagnose what parts need repair or replacement.
Posted on Oct 11, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 93 Camry strut replacement.
If you plan on keeping the car, it's always a good idea to replace the seats/bearings when you do the struts - having to replace them afer is a pain. If you mean should you replace the strut lower bushings, yes, definitely.
Hope this helps :)
Posted on Mar 10, 2009
SOURCE: 2000 Lexus ES300 - 45K
Are you sure this is a rattle or is it more of a creaking noise? I have a 2000 ES300 and had an issue when I would go over speed bumps and the noise would drive me nuts! However replacing the bushing in the top of the strut mount is expensive due to the labor involved.. Replacement of the strut or the bushing isn't necessary. Just open the hood, locate the strut housing and you ll be able to see the black rubber bushing in the middle. Obtain a can of Heavy Duty silicone aerosol spray and attach a straw to the spray tip. Using a flathead screwdriver wedge the screwdriver between the top of the bushing and the metal pushing the screwdriver all the way to the edge of the metal underneath the roof of the metal housing. Then pry the edge of the bushing away from the metal housing so that the top of the edge of the bushing exposed and stick the straw end of the silicone into the spot and spray generously. Only slight bushing movement will be obtained as the bushing is pretty stiff but it will be enough. Work your way around using this technique until you get the spray fully around the bushing 360 degrees getting it into the area between the edge of the bushing and the metal. Then spray the silicone onto the top of the bushing filling it all the way up until it spills over the metal. After it drains down, repeat again making sure you fill it above the rim of the bushing so it seeps into the area between the bushing and he metal housing (or frame) because this is where the rubbing is taking place that is creating that awful noise. Repeat on the other side and your done. The main goal is to get the silicone into the area between the metal and the bushing along the edge. This happens to be the way I was able to do it. This totally solved my problem and now the car is so quiet there aren't any knocking, creaking or rattling noises. This was a hard solution to explain without visuals, hope you can follow. This will work for sure. The Heavy Duty Silicone spray I used was manufactured by CRC and I bought it from Walmart.
Posted on Jul 22, 2009
Not that I know of the only thing I know of is to take it to either a body shop or a welder and have a plate welded into place. How old is the escort, it may not be worth the cost. How is the rest of the car rust wise?
Posted on Aug 11, 2009
Tips for a great answer:
Jun 20, 2011 | 2002 Pontiac Grand Prix
Feb 06, 2011 | 2000 Pontiac Grand Prix
Jan 03, 2011 | 2004 Pontiac Grand Prix
Sep 22, 2010 | 2000 Pontiac Grand Prix
Jul 02, 2010 | 2000 Pontiac Grand Prix
Jun 04, 2010 | 2000 Jeep Grand Cherokee
May 20, 2010 | 1997 Pontiac Grand Prix
Jan 20, 2018 | Nissan Cars & Trucks
Jan 20, 2018 | Toyota Cars & Trucks
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: