Question about 2002 Nissan Altima

1 Answer

Left rear splash shield 2002 Altima fell off

Left rear splash shield on my 2002 Nissan Altima fell off yesterday. I have some retainer clips, but have no idea where the shield is supposed to go. Help!

Posted by on

  • hdanley Apr 23, 2009

    What kind of bolts? Can I get them at AutoZone? And would they know what I was talking about?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

4 clips to the fender. 3 bolts to the body frame. the splash shield cover the tire.

Posted on Apr 23, 2009

  • Frank
    Frank Apr 24, 2009



    10/32 regular screws. you can get them form any hardware store.

    you can get a hex head one from auto parts store.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the horn location under hood of a 2007 mercury mountneer?


Remove the LH front fender splash shield !
Fender Splash Shield Removal and Installation
  1. Loosen the running board bolts and lower the running board to access the front fender moulding pin-type retainer.
    • To install, tighten to 23 Nm (17 lb-ft).
  1. Remove the lower pin-type retainer from the front fender moulding.
  1. Remove the 2 rear pin-type retainers from the front fender moulding.
  1. Position the front fender moulding aside and remove the splash shield lower screw.
    >
  1. Remove the front splash shield screws.
  1. Remove the front splash shield pin-type retainers.
  1. Remove the front splash shield.
  1. Remove the front fender splash shield.
  1. To install, reverse the removal procedure.

Mar 25, 2015 | 2007 Mercury Mountaineer

Tip

How to remove a bumper off a ford puma


How to Remove a front bumper off a ford puma

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

on Jan 31, 2010 | Ford Focus Cars & Trucks

2 Answers

Procedure for changing fuel filter 2002 lincoln ls


Remove left front tire
Remove 3 plastic push pins on inner
fender splash shield
On your right where your left foot would
be inside the veh, is the fuel filter
Remove 1 screw,I believe 7mm,
that holds filter clamp,which you will
transfer to new filter
Push filter line release connectors
with fingers only

Dec 19, 2010 | 2000 Lincoln LS

1 Answer

Replace alternator


Remove or disconnect the following:
  • Negative battery cable
  • Right front wheel
  • Right fender splash shield
  • Accessory drive belt
NOTE The crankshaft pulley retainer has left-hand threads.

  • Crankshaft pulley
  • Alternator harness connectors
  • Alternator

eed945c.gif

Remove the crankshaft pulley to provide clearance—2002–04 3.0L


To install:
  1. Install or connect the following:
    • Alternator and tighten the fasteners to 18 ft. lbs. (25 Nm)
    • Alternator harness connectors
    NOTE The crankshaft pulley retainer has left-hand threads.

    • Crankshaft pulley and tighten to 74 ft. lbs. (100 Nm)
    • Accessory drive belt
    • Right fender splash shield
    • Right front wheel
    • Negative battery cable
  2. Start the engine and check for proper operation

May 12, 2010 | 2003 Ford Taurus

1 Answer

I have a 2002 Lincoln ls . How do I replace the abs speed sensor? Right front tire?


you have one on the inside of each wheel.
SECTION 206-09A: Anti-Lock Control 2002 Lincoln LS Workshop Manual
REMOVAL AND INSTALLATION Front Wheel Speed Sensor
Material Item Specification RTV Silicone Sealant
FSTZ-19G204-AB (Canada CXC-114A) NAVSTR Sealer
Removal and Installation
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Position the inner splash shield aside.
    1. Remove the pin-type retainers.
    1. Position the inner splash shield aside.
  1. Disconnect the anti-lock brake sensor electrical connector.
  1. Remove the anti-lock brake sensor harness from the brake hose clips.
  1. Remove the anti-lock brake sensor.
    1. Remove the anti-lock brake sensor clip.
    1. Remove the anti-lock brake sensor.
  1. NOTE: Make sure the anti-lock brake sensor is fully seated before installation of the new clip.
    To install, reverse the removal procedure.
    • Apply a 2.5 mm (0.1 in) bead of silicone sealant to the outside diameter of the anti-lock brake sensor.
-------------------------------------------------------------------------
Rear Wheel Speed Sensor Removal and Installation
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Disconnect the rear anti-lock brake sensor electrical connector.
  1. Remove the rear anti-lock brake sensor harness from the control arm clips.
  1. NOTE: Clean off dirt and foreign material that may have collected around the rear anti-lock brake sensor before removal.
    Remove the rear anti-lock brake sensor.
    1. Remove the anti-lock brake sensor bolt.
    1. Remove the anti-lock brake sensor.
  1. To install, reverse the removal procedure.

Feb 24, 2010 | 2001 Lincoln LS

1 Answer

How do you take bumper off a ford puma?


Front Bumper (434230)

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

Jan 01, 2010 | 2007 Ford F

3 Answers

How do i change a headlight in a 2002 sunfire


    1. Step 1 Lift the hood and locate the air intake splash shield. This is the plastic cover running along the front rail of the vehicle and covering the headlights access. You will notice some plastic pins holding down the splash shield. Simply lift the head of each pin up about a quarter of an inch and pull it out of the pre-drilled holes. Remove the splash shield when you've extracted all the pins.
    2. Step 2 Locate the two retaining bolt at the top of each headlamp (on the left and right side top) on the front frame rail. Remove them with a ratchet and socket.
    3. Step 3 Slide the headlight assembly out being careful not to scratch the bumper.
    4. Step 4 Unplug the wire from the back of the headlight. You may convince it with the screwdriver to release the tabs from the lock clip on the headlight, but be careful because it's plastic.
    5. Step 5 Turn the bulb retaining ring to the left and remove it. The old bulb will fall out now.
    6. Step 6 Insert the new bulb being careful not to touch the glass part of the bulb. Halogen headlights can be compromised or damaged by oils and alkaline in our skin. Place the retaining ring over the headlight and turn to the right and plug the wire back into the bulb. It would be a good idea to turn on the power and check the headlight now to make sure it's working properly before putting everything back together.
    7. Step 7 Replace the headlight assembly retaining bolts.
    8. Step 8 Replace the splash shield and insert the pins. Pushing down on them in the pre-drilled holes is all you'll have to do to lock them.
    9. Step 9 Remove any tools you might have left under the hood and close it.

Nov 21, 2009 | 2002 Pontiac Sunfire

2 Answers

Need step by step instructions on how to remove a rear bumper cover on a 2007 nissan altima


Rear Bumper: Service and Repair
REAR BUMPER
Removal and Installation
REMOVAL
1. Remove the LH and RH rear combination lamps.
2. Remove both the rear wheels and tires.
3. Remove the LH and RH splash shields.
4. Remove the rear bumper fascia clips and screws, then remove the rear bumper fascia.
5. Remove the rear energy absorbing foam.
6. Remove the rear bumper reinforcement.
7. Remove the rear bumper supports.
INSTALLATION
Installation is in the reverse order of removal.

c674cde.jpg

Nov 12, 2009 | 2007 Nissan Altima 3.5 Sedan

1 Answer

How to change serpentine belt on a 2002 altima 2.5S?


Lift car...Turn wheels to right....Remove inner splash shield. Use 14mm long wrench to move belt tensioner back. Install belt...

May 18, 2009 | 2002 Nissan Altima

1 Answer

2002 nissan altima, left rear window only go down electrically, replaced motor and switch no luck


replace the master switch on the drivers door. all power and control circuits for all power windows go thru the drivers door switch. f it malfunctions the other switchs will not function correctly

Apr 12, 2009 | 2002 Nissan Altima

Not finding what you are looking for?
2002 Nissan Altima Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...