Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 bmw 528i severe misfire
If you've never replaced the timing belt or chain,That would be my first thing I'd check is the Timing belt or chai, just aline the timing marks on crankshaft and then look at the position on the distributor to see if it's pointed in the #1 firing position .
Posted on May 02, 2009
Inadequate fuel pressure, change the fuel filter first, make sure the car sits for at least two hours before replacing the fuel filter because these fuel lines are under high pressure during the time of operation. The pressure usually decreases over time in the lines but wear safety glasses just the same, I would recomend depressurizing the fuel system first, buy a Haynes repair manual for detailed procedure to be safe. If problem persists go to Auto Zone and ask them to check for trouble codes these codes if present may instuct you in detail to replace the MAF sensor or give you a code that must be looked up to find the problem.
Posted on Jul 22, 2009
Crank sensor or engine speed sensor is faulty.
Irregular power loss on accelerating
The speed of the engine is limited till 2500rpm
Frequent loss of crankshaft position sensor signal
It is caused due to leaking from thermostat housing into crankshaft position sensor harness multi-plug
Check and clean the crankshaft position sensor harness multi-plug contacts. Rectify the engine coolant leak from the thermostat housing if found. Take a note of the engine coolant level and monitor it for changes, showing a leak is indeed occurring.
Posted on Oct 24, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
Tips for a great answer:
Sep 27, 2016 | 2007 Hyundai Santa Fe
Dec 15, 2015 | Jaguar Cars & Trucks
Oct 19, 2015 | BMW Cars & Trucks
Sep 17, 2012 | Cars & Trucks
Dec 11, 2011 | Cars & Trucks
May 02, 2009 | 2008 BMW 528i Sedan
Mar 29, 2009 | 2000 BMW 5 Series
27 people viewed this question
Usually answered in minutes!