Question about Cars & Trucks

8 Answers

What can be done to correct teeth alignment? - Cars & Trucks

Posted by on

Ad

8 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 12,650 Answers

Go to a dentist --or orthodontist

Posted on Sep 05, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

For getting a correct alignment of teeth, you can prefer the best Invisalign treatment provided by Invisalign Braces London.
This treatment can be used to cure issues like spaced teeth, over crowding, over bite, cross bite, under bite, etc.
This is a painless, discreet and easy way to get rid of irregular teeth alignment and hence to get a better smile. What can be done to correct teeth alignment? - incognito-braces-3-1-768x485-e0k1pw3p4z3zeofet4nxgtte-2-0.jpg

Posted on Sep 05, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Now a days, there are many treatments available on orthodontist that can help you to get the correct teeth alignment. You can also get free consultation on your case from Tallahassee Dentist. They will get thorough checkup and find out the reason for the wrong alignment of your teeth and then they will give you the correct treatment for your teeth. They are the experienced dentists in the town with highest success rates of treatments that they do.

Posted on Oct 20, 2016

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

You must try braces but don't try it by your own. Invisalign M?nchen is the another option for your unshaped teeth that works same as braces but remains invisible. So it won't affect your confidence. It is very beneficial but if you need some more suggestion regarding teeth alignment, must contact your near orthodontist or you may also contact online dental treatment provider such as Eugnath. Good Luck.

Posted on May 27, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 130 Answers

Nowadays, there are a variety of orthodontic treatments available for alignment of teeth including braces and retainers. You can consult with a reputed Orthodontists Munich for the better treatment, an orthodontist will help you to find which is the best treatment in your case.
You can get guidance from Kieferorthop?de M?nchen such as Eugnath.de.

Posted on May 12, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 45,403 Answers

The above are good suggestions but it depends on the age of the person
if the age is around 5 then an orthodontist may recommend the removal of problem teeth to allow for room for the other teeth to straighten normally and naturally
really you should be getting advice from the orthodontist as they are specialist in the teeth field and sometimes braces for a child can be traumatic and not always necessary

Posted on Apr 08, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

You can get a correct teeth alignment after wearing braces or Invisalign, Invisalign is used as an alternative to the Braces as they are transparent teeth aligners used in an Orthodontic treatment. You should visit a good Orthodontist to get a perfect teeth, by proper treatment. You can also consult with Invisalign Munich for better options and details about the process. Invisalign Mnchen Incognito Zahnspange Mnchen

Posted on Apr 08, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Most effective method of correcting the alignment of the teeth and jaw line is implementation of dental braces, which includes bands and wires. According to the severity of dental structure 6 months braces or long term braces is advised by dentist. Short term braces in Texas has numerous comprehensive orthodontic treatments for correcting the alignment of teeth.

Posted on Oct 11, 2013

  • Dane Kimball
    Dane Kimball Feb 24, 2014

    I think that braces are probably the most effective way for teeth alignment. I have heard of invisaline which I think is just braces that you can put on and take off. I have had braces before so I know that's an effective way to straighten your teeth. Oasis Orthodontics

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Craftsman YT 3000 left tire is not aligned. When you make a turn the tire doesn't stop it keeps turning almost making it turn a full 180. Took it to a "mechanic" said nothing is bent or looks damaged


Hi Victor:

If you follow the steering from the wheel down the shaft you will probably find a geared "quadrant". Odds are thar one of the teeth has "jumped" a notch or two out of alignment.
The fix will be to loosen the mechanism so that you can re-align to the correct positiion, then tighten it back up.

Aug 24, 2015 | Garden

2 Answers

How do you align the timing chain correctly for a 2004 Toyota Rav4 with a 2.4 engine?


be careful - that is not an easy job.....
if done wrong the engine will be busted....
better let a toyota-shop do that if you are not a mechanic
sample: 2000 Toyota RAV4 Serpentine Belt Routing and Timing Belt Diagrams
25439674-dtj5krvtgjoqdjoc5b0bl5xd-2-0.jpg

25439674-dtj5krvtgjoqdjoc5b0bl5xd-2-2.jpg

Feb 17, 2015 | 2004 Toyota RAV4

1 Answer

Need to set cams and timing on a 4.0 twin cam jag. I got the timing tools to do the project and it is not right . set cam plate, install crank plug set the chains and timing is not correct.. help me out...


I have a book here that gives the info as to how to set the timing marks so I will start with the precaution. stated Do not turn crank or cam shafts with the chains removed . Now the rest you have probably done but there is a note here that you may have missed . It says --warning ensure that the crank shaft sprockets are installed correctly. The diagram shows the sprockets together with a dot on each They are assembled with the dots either together or are on the both outsides of the sprockets. To have the sprockets so that the dots are one on the outside and one in the middle is wrong. IN effect the dots either align the sprockets so the teeth are in line which is wrong as the teeth on one sprocket has to point to the middle between of the teeth of the second sprocket. This makes one chain 1/2 tooth out to the other. The last warning is to ensure that the oil gallery blanking plate is installed correctly install one or two chain wedges to take up the slack. at this point I would say that the problem is not having the sprockets assembled correctly is where you went wrong.

Oct 01, 2013 | 2000 Jaguar S-Type

1 Answer

Tracking, new tyres fitted and worn on inside in 6 weeks, had alignment done but they will not go straight, any ideas please


If they did the alignment correctly, you should be perfect. Now, on the other hand...any shop doing an alignment on a vehicle should be required to check all the suspension parts for damage and wear. Even a slightly loose ball joint or bushing needs to be replaced before such an alignment is done. Shops are notorious for shabby work nowadays and it is so hard to find a decent mechanic to do a job correctly. If your not happy with the job, bring it back and ask why it is doing this to the tires. I know it has been a while since you had the alignment down, but that is besides the point. Maybe the alignment guy was off that day and some other guy pretended he was an alignment guy, lol. When I get mine done, I love to sit in the window and watch them so called professionals do the work. They should give you a paper readout of the settings found and change to. But, most of all they should always check for worn parts that are almost always present. After and alignment, the mechanic better take it for a test drive. If that vehicle does not go straight down the road with hands off the wheel, it was not done correctly, period.

Aug 08, 2013 | 2005 Mitsubishi Outlander

1 Answer

I have a 2004 vw passat ihave put a new clutch and fly wheel on and after i run car for a bit and you go to start it. it made alot of noise in bell houseing.


If it only makes noise when you start it, and the clutch seems to be working fine...then it would have to be the starter is not aligned correctly, or the teeth on it are damaged. Take the starter out of the bell housing, and give the teeth a good inspection. If all looks OK, them it may have been in a bit crooked. Try and line it up so the teeth appear to meet at the right place with the fly wheel teeth. It may have moved after the first start if it wasn't torqued correctly or has stripped threads.
Good Luck!

Mar 02, 2010 | 1999 Volkswagen Golf

2 Answers

Grinding when starting, replaced starter one month ago engages well sometimes, but now will not engage flywheel could the flywheel teeth be worn or broken?


The flywheel is worn in that specific area. Engines tend to stop in the same one or two positions, and it is those teeth that get cachunked every time you turn the key. This is ok if the bendix does a good job of threading the gear into the flywheel teeth, but the problem is that now that the teeth are half worn away, the starter attempts to mount its gear to the teeth, but before the gear is fully seated, the contacts in the motor make, the motor starts to turn, and the not-yet-seated gear bounces off of the flywheel teeth. This is what causes the teeth-grinding sound (your teeth grinding in your mouth too!) when you turn the key. . There are two solutions: The first is to, of course, replace the ring gear. . The second is hard to explain, but a good starter rebuild center (if there is such an accessible animal around anymore) will know what I'm talking about: The starter gear must have the lagging edge of each tooth ground so that each tooth will look like a chisel. The "pushing" side of each tooth must be straight and come to the point (and not be beveled). The "non-pushing" lagging side of each starter tooth should have the bevel ground in on that side. This grinding is done easily by a small angle grinder or a Dremel Tool with a cutoff wheel. . This does one thing: It assures that the gear will "spin in" without bouncing. If ground correctly (it's not hard to do), you will get successful starts every time. This is a common fix for Toyota 4-cyl with this horrible all-too-common problem. Good luck.

Nov 25, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

How to set timming belt,cant find mark for crankshaft 3.0L


Timing belt removed, static timing was not set before removing timing belt.

[Set Static Timing:
No.1 piston is brought up to TDC before removing timing belt.

Cam gear has a punchmark on face of gear, and this mark aligns with one single tooth. There is a matching punchmark on the Timing Belt Rear Upper Cover.

Facing the cam gear, the mark is to the upper right. There is an 'egg shape' of the timing belt upper rear cover, in this spot. This punchmark is in that 'egg shape', and is close to a bolt hole. The cam gear mark lines up with the Timing Belt Rear Upper Cover, mark.

The crankshaft gear has a punchmark on the face. It lines up with one single tooth. There is a corresponding punchmark on the lower right side. An alignment mark)

Should be a round punchmark on the face of the crankshaft gear. It lines up with a single tooth. Wipe the gear clean, use a little carb cleaner. (NO flames, or sparks nearby, well ventilated area)

Barring you cannot find the crankshaft mark, find the camshaft alignment marks, make sure they are aligned with the alignment, (Punchmark), on the Timing Upper Rear Cover.

Count the teeth in the timing belt. There should be 133 teeth on the belt.

There is 43 teeth in-between the timing mark of the camshaft, and the timing mark on the crankshaft.

(43 teeth in-between the Right Side Camshaft mark to crankshaft mark, 43 teeth in-between the Left Side Camshaft mark to crankshaft mark)

There should be 40 teeth in-between the two cam gears.




Oct 24, 2009 | 1989 Nissan Pathfinder

1 Answer

Correct way to align timing marks


hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers

May 11, 2009 | 1994 Hyundai Excel

3 Answers

Cant seem to time my 1990 subaru legacy


your timeing marks are on the block rite abouve the cams on either side and on the block in the middle but line the center mark on the teeth there is a mark not the arrow the arrow is where tdc is the mark is on teeth good luck.

Mar 26, 2009 | 1990 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...