Question about 2005 Toyota Sienna LE

Open Question

Replace dash cupholder - 2005 Toyota Sienna LE

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: replace dash cupholder

Hi. This is an easy do. With the cup holder fully extended, slide a flat puddy knibe into the top **** between the cupholder and the the dash. slide it side to side to disengage the stops that are part of the cupholder while pulling out lightly on the cupholder. It should come out without much effort. To reinstall, just push the replacement cupholder into the slot. Good luck!

Posted on Oct 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge caravan cupholder removal


Google it. There are several different variations. Instructions are available on the dodge caravan forums for each style

Aug 26, 2016 | 2010 Dodge Grand Caravan

1 Answer

The cupholder in my Montana is stuck,and won't come out...what do I take apart to get it back out?


Dash Cup Holder is stuck and won't come out, how do I fix ...

www.fixya.com/.../t10005627-dash_cup_holder_stuck_won_39_t_come
Aug 5, 2011 - Dash Cup Holder is stuck and won't come out, how do I fix it? - Saab 2004 9-3 ... How do I remove an in-dash cup holder in my 2005 Chevy Malibu. Apr 26, 2014 ' 2005 ... Nov 05, 2012 ' 1999 Pontiac Montana ยท 1 Answer ...

cup holder montana van Questions & An


Dec 26, 2015 | Cars & Trucks

1 Answer

Replace dash cupholder


Hi. This is an easy do. With the cup holder fully extended, slide a flat puddy knibe into the top **** between the cupholder and the the dash. slide it side to side to disengage the stops that are part of the cupholder while pulling out lightly on the cupholder. It should come out without much effort. To reinstall, just push the replacement cupholder into the slot. Good luck!

Sep 20, 2012 | 1996 Toyota Corolla

1 Answer

How to repair cup holder and spring under radio? picture???


94-99 luminas i think are all the same as far as the dash and the console etc.... At any rate i ran into this problem so i can tell you what to do.
#1 Remove the ash tray by pulling it out n pressing the silver tab down while pulling it completely out of the dash
#2 Remove the four 9/32 nuts around the perimeter of the black metal housing that held the ashtray in place
#3 there are 2 more hidden 9/32 nuts right under the trim piece under the stereo. If you aren't careful you will bust ur dash apart and have to replace this all. The easy way i did it was i pulled out the broken cupholder and sawed it in half then pushed it back in so i gained easier access to the bolt locations as they are quite hidden, next pull up the bottom right corner of the radio trim piece on the dash and keep it propped with a flathead screwdriver and remove the final 2 nuts. Twist loose the cigarette lighter hookup, bend back the 2 tabs holding the old cupholder in the track to remove it and ur ready to re-install ur new cupholder

Apr 27, 2010 | 1995 Chevrolet Lumina

1 Answer

How can we repair or replace the cupholder that springs out from the console on our 2004 buick regal - one of the swing-out cupholder pieces came off


This is a very very common problem... your best bet is to get a replacement... the GM guys didnt design out cup holders very well

Jan 25, 2010 | 1996 Buick Regal Olympic Gold

2 Answers

Want to take the cupholder out that is under the radio


look inside the cupholder see if there is screws.

Aug 04, 2009 | 1997 Chevrolet Lumina

1 Answer

Cup Tray removal


  1. Tilt the cupholder down.
  2. Remove the screws holding the cupholder to the instrument panel (IP).
  3. Remove the cupholder from the vehicle.

May 30, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

How do you remove the cupholder?


For the indash center cupholder, you need to remove that odd-shaped panel directly below it on the lower dash. There is 2 screws you can remove from there and then there are 2 more on the sides of the cup holder you can see from the front when the holder is in the open position... be patient and wiggle it around a little it will come out of there!

Let me know how you do..

Mar 31, 2009 | 1999 Ford F350 Regular Cab

2 Answers

I have a '97 4-Runner and a broken in dash cup holder that I cannot determine how to remove. Help


HI If it is like my 92 toyota, Pull it all the way open and from underneath push up gently on each plastic clip where the cupholder meets the dash they are on the bottom furthest outside edges

Aug 12, 2008 | 2002 Toyota 4Runner

Not finding what you are looking for?
2005 Toyota Sienna LE Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...