Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
when you open the fuse panel under the hood it should be on the drivers side and the third one then there is a empty space for a relay then more relays
Posted on Jun 30, 2009
I would check if it is in the gas tank on that model. you can go to your local parts store and they should be able to inform you of this.
Posted on Jul 12, 2009
The fuel pump relay in the 1991 corvette is located under the IP on the pass side.
Open pass door, unscrew two screws under the glovebox (you will be upside down in the car), take off the fuse panel, unscrew third screw to plastic plate underneath glovebox, pull away carpet (velcro), pull down plastic plate (watch out for the wiring to the lamp), then under the glovebox you will find a number of fuses and relays if you dive in under there DEEP, prob 4 or 5 in a row, not really sure wich one, but one in the middle is the fuel relay, and they are the same (interchangable).
Take a look at --the12volt.com/relays/relays.asp--
It´s those relays we are talking about.
Posted on Sep 12, 2009
Code 1495 = Leak Detection Pump Solenoid Circuit
Remove the connector from the solenoid (should be on the back wall, just to the drivers side of the air-hat). You will have the solenoid to check and the harness. What you want to measure is the voltage coming from the harness and the resistance of the solenoid.
Turn the key to the "ON" position but do not start the motor; the voltage at the connector should be at least 10V or more,.now, check the resistance of the solenoid (should be around 35 ohms).
Posted on Jun 03, 2010
Tips for a great answer:
Aug 31, 2011 | 2000 Chrysler Sebring
Aug 29, 2011 | 2001 Chrysler Sebring
Apr 19, 2011 | Chrysler Sebring Cars & Trucks
Jul 06, 2010 | 2001 Chrysler Sebring
Mar 22, 2010 | 2001 Chrysler Sebring
Mar 08, 2010 | 1998 Chrysler Sebring
Aug 19, 2009 | 2001 Chrysler Sebring
Aug 18, 2009 | 1997 Chrysler Sebring
Nov 18, 2017 | Mazda Cars & Trucks
36 people viewed this question
Usually answered in minutes!