Question about GMC Cars & Trucks
Truck is making black smoke and won't go over 50km/h
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check the breather filter, a quick test is pull the oil dipstick and rev engine if oil rises up dipstick replace breather filter straight away as it will blow engine if not
Posted on Mar 24, 2009
Some of these engines have a place to drain water out of the fuel system.. Some fords actually have a stick under the hood that you push or pull That opens a valve on a water collection bowl. It's not labeled usually. It might state where it is in the owners manual under fuel water drainage or something similar.. if that bowl is full it will cause hesitation... If it gets over full it will cause runability problems. Another possibility since you said it's black smoke is one of your injectors is sticking at low rpms and squirting raw fuel into the cylinder till the rpms get up enough to burn that fuel off completely then then the injector works a little better.... Do you notice any missing... Feel something under the hood like the air cleaner housing and make sure the vibration is constant and doesn't have a small sudden shake and the n smoothe... And then a small sudden shake again.
If it does have this shake you can trouble shoot which injectors by with the engine running loosening an injector line and seeing if the engine runs worse or not.. If it runs worse tighten it up and move to the next line till you unscrew one and feel and hear no difference... When you find that one that's the injector with the problem.
Posted on Apr 22, 2009
Sounds like you have a clogged PCV valve thats the valve that lets the gases that get into the crankcase be rerouted back into the intake. It's silver about two inches and is usually in a rubber fitting in the valve cover and will have a hose on the other end. it's no tools installation just pull the hose off pull it out and replace with a new one. thats the first thing i'd do - 10 mins and 10 bucks should do it
Posted on Sep 05, 2009
Does any one have a idea a friend here has changed ecm, inj, fuel pump checked conector at fire wall ,fuel and has a short wrecker tow f450 99 and will be going down the road and he says the thing just loses all power and kind of just won't do over 15 to 20mph and lets it sit and he says it will do it again. I am not sure how long it takes but since I don't work on diesels I figured I would have the experts that do if anyone knows it's you guys any help he is in Charlotte NC I can put you with this guy he has had it to all the parts changers and no luck Thanks Mark 704 492 1647
Posted on Mar 02, 2010
There is a oil drain return from the turbo charger to the sump. If the sump oil level covers the outlet into the sump, oil will build excess pressure tin the turbo causing the sealing rings to leak oil in to the intake manifold. This would cause smokey exhaust and loss of oil. Try this. Drain the sump completely, refill with the exact quantity of oil to Mazda spec. Dip the oil and if the new oil level is lower than the full mark on the dipstick, you have found the cause of the problem. Mark this new level with a scriber or file and fill only to this new level. Hope this is the solution.
Posted on Mar 23, 2010
Tips for a great answer:
Dec 04, 2016 | Nissan Terrano Cars & Trucks
Jan 04, 2016 | Cars & Trucks
Mar 05, 2015 | Tata Cars & Trucks
Sep 15, 2014 | Cars & Trucks
Nov 13, 2013 | Cars & Trucks
Nov 01, 2013 | Cars & Trucks
Mar 05, 2011 | Ford Transit Connect Cars & Trucks
Oct 15, 2008 | 2002 Land Rover Freelander
Aug 19, 2008 | Mitsubishi Passenger Cars & Trucks
20 people viewed this question
Usually answered in minutes!