Question about 1996 Nissan Maxima
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to remove all of the air intake and other things behind the battery. The start motor is held in with two bolts. You might need a breaker bar to break loose the one bold as I did. Once you remove all of the air intake equipment. This will help you gain access to the starter motor. You might not need to remove all the air intake equipment I know it made it alot easier for me to remove the starter and I took it to the auto store and had it tested.
Posted on Apr 07, 2009
Try this it works for the 95 and 96 models it should also work for all models 95 thru 99. 1st you need to get in the car and hit the lock button on the drivers door switch. Make sure doors and windows are all shut. To program the remote you must insert the key into the ignition 6 to 8 times rapidly in a 10 second time period and when you have done it correct the hazards lights will then illuminate twice. Next then you must hit the lock button quickly on the remote due to a slight time delay only hit the button once. Keep repeating this step until it works and to find out if it worked hold down the trunk button or the unlock button(the front windows should let down on you Mad-Max.
Posted on May 31, 2009
The water pump is located behind the timing chain cover. There are two black plates on the front cover. The one near the front of the car has the water pump behind it. The other one has the timing chain tensioner behind it. First you must drain the coolant. Then support engine and remove engine mount. Then remove drive belts. Then remove the two black plates. Push the tensioner in and lock it with a paper clip. Then remove the two bolts holding the tensioner and remove tensioner. Then remove the water pump bolts. Rotate engine crankshaft the take tension off of water pump (about 20 degrees). Then install two bolts into water pump threaded flange (M8). Tighten M8 evenly as water pump will come without damaging it. Check for corrosion. Then replace with new one. Make sure you use new "O" rings. Lubricate with engine oil. Put the original three bolts back in the water pump. Then install timing chain tensioner and black covers. Replace belts and engine mounts. Add coolant and pressure test system.
Posted on Sep 07, 2009
Tips for a great answer:
Jan 25, 2014 | 1997 Nissan Maxima
Nov 20, 2011 | 1997 Nissan Maxima
May 04, 2011 | 1996 Nissan Maxima
Jan 25, 2011 | 1996 Nissan Maxima
Jan 19, 2011 | 2004 Nissan Maxima
Aug 28, 2010 | 1997 Nissan Maxima
Jan 12, 2010 | 2000 Nissan Maxima
Mar 21, 2009 | 1997 Nissan Maxima
Jan 07, 2009 | 1989 Nissan Maxima
13 people viewed this question
Usually answered in minutes!