Question about Cars & Trucks

Open Question

I need to reset Timing belt light on a Toyota Hiace 2006 D4d WITH A ELECTRONIC SPEEDOMETER tHAN YOU

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
badnad
  • 1 Answer

SOURCE: How do you disassemble toyota hiace 2006 dash?

Its easy, The only tool you need is a plastic lever tool. Or can be done with big head screw driver (but car for the trims for it can get damaged)
Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well. There may by plugs connected to the front panel. Disconnect that and it exposes the digital meter, I think it then takes only 2 x 10m bolts and the dash is out.

Posted on Dec 06, 2009

Ad
  • 1 Answer

SOURCE: Timing belt light of Toyota LandCruiser 2006

the reset procedure of the timing belt light is all done by pressing the trip meter button and holding it in whilst the ignition is turned to on then select from the trip button then continue pressing until you come to 15 on trip metre, turn off and then restart. The light should then go off.

Posted on Jan 13, 2010

  • 4 Answers

SOURCE: my timing belt light comes and i need to reset the

You need to remove the dash first, then remove the speedo /guage cluster unit from the vehicle, by undoing the 3 or 4 plugs on the back of the cluster unit. when you look at the back of the unit you will see alot of srews and wires. look closely around the middle part and you will notice a small phillips screw with a empty hole next to it. remove the srew and put it back into the empty hole which was next to it. This resets the timing belt lamp. good luck

Posted on Aug 03, 2010

  • 184 Answers

SOURCE: how to reset timing belt

usually 2 options to reset toyota light.
1.remove small rubber plug in dash clear lense.use a long thin rod to reach in and push the small reset button at the bottom of the gauges.Light will extinguish.
2.remove the instrument panel and unplug all from behind to turn it over.Usually in the centre of the rear you will see two holes and 1 screw.for t-belt.shift the screw to other hole.refit dash ensuring all the plugs are refitted.Light should now be out.

Posted on Apr 02, 2011

emissionwiz
  • 76164 Answers

SOURCE: reset the timing belt light of d4d does not off

Duplicate question

Posted on Jun 11, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset timing belt light on 2015 toyota d4d


  • Cliford
  • Ignition(key) off press odo button.
  • Hold odo switch ignition on for 5 seconds.
  • Switch ignition off release odo.
  • Press odo, switch ignition on and continue holding until light goes off.
  • Switch key off and check by starting vehicle.
  • The light should now be off .
  • You can also veiw links below.
    • "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Toyota Dyna Landcrusier belt light reset

Toyota Hilux 6th generation BELT Light Reset on Denso Instrument Cluster

How to reset D4D belt light

Mar 03, 2016 | Toyota Cars & Trucks

1 Answer

Where are Cam and crankshaft timing marks on nadia d4d engine


follow this link for a video showing change of timing belt , this will show the timing marks etc
Toyota avensis D4D 2 litre diesel timing belt installation

May 04, 2015 | Cars & Trucks

1 Answer

How to reset timing belt light of 2kd-ftv hiace 2006 model


that's funny, (skipping the job?>)
plug in scan tool hit reset! (best of best)
find all ECU fuse, pull them, it resets
pull battery neg lug, and this works but kills radio codes,(bricks it) and kills NAV option with same reasons.

in most cars there is a chapter in the operators guide
called resettiing service codes, did you read that yet.

Jan 16, 2015 | 2007 Toyota Hi-Ace 220

1 Answer

How do i reset the timing belt light for 2005 toyota hiace with analog speedo?


The computer probably needs to reset to clear the code. Best way is go to Auto Zone or Advance Auto and ask them to reset the comupter. It can be done by disconnecting the negative battery cable from the battery, but then you may have problems with the security system, and you can loose stored info in your radio, etc.So I suggest you have the computer cleared of codes.

May 19, 2014 | 1999 Toyota Land Cruiser

1 Answer

Toyota hiace van


check your fuse

Dec 07, 2013 | Cars & Trucks

1 Answer

I have a Toyota hiace 2004 2.5 d4d. I have recently changed the oil as the oil change light had come on. I reset t he oil light on the dash which was fine. I now find tho that every time I turn the...


Make sure that you are using the correct oil viscosity for this engine recommended by the manufacturer, it should also be indicated on the oil filler cap.

Nov 09, 2011 | 2004 Toyota Highlander

1 Answer

My timing belt light comes and i need to reset the light it have a degital speedmeter. How do i reset the timing belt light ? It is a toyota hiace.


You need to remove the dash first, then remove the speedo /guage cluster unit from the vehicle, by undoing the 3 or 4 plugs on the back of the cluster unit. when you look at the back of the unit you will see alot of srews and wires. look closely around the middle part and you will notice a small phillips screw with a empty hole next to it. remove the srew and put it back into the empty hole which was next to it. This resets the timing belt lamp. good luck

Jun 30, 2010 | 1999 Toyota Land Cruiser

4 Answers

Timing belt light of Toyota LandCruiser 2006


the reset procedure of the timing belt light is all done by pressing the trip meter button and holding it in whilst the ignition is turned to on then select from the trip button then continue pressing until you come to 15 on trip metre, turn off and then restart. The light should then go off.

Dec 27, 2008 | 2006 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...