Left side high beam will not come on. Changed bulb, still will not come on. Low beam is fine. Would there be a high beam fuse by chance that is blown? Thanks.
Check the tipm module for high beam driver may be bad
SOURCE: left low beam is out on my 2006 dodge ram 1500 4.7
I'd still vote for the bulb being bad. The high and low beams use two different filaments, so unless the bulb is physically broken, it is common for the low beam to be bad whilst the high beam is good.
That's why you see some people driving around with their high beams on -- they don't want to get stopped for a 'light out' citation..
When you take the bulb out to replace it, be sure to look at how it is mounted before removing. You don't want to accidently adjust your headling out of kilter.
good luck
SOURCE: 2007 Dodge Ram 2500, Right
that sounds like the dimmer switch has a problem it is not switching one side.
Poss switch or the wiring harness that plugs into dimmer switch.
425 views
Usually answered in minutes!
×