Question about Dodge Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Link for a 99 - 3.3.L, but diagram should be same. Scroll down to figure 11 when you click on this link.
Posted on Sep 04, 2008
Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in the following picture:
Posted on Oct 23, 2008
1) open the hood.
2) Carefully remove the three screws holding the headlight assembly in place.
3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. (Do not touchglass with your fingers or it will cause the bulbs to catastrophically fail - clean with alcohol pad if you touch the glass)
4) Carefully insert the headlight assembly back into place.
5) Replace the three screws removed in step 2 being careful not to over tighten.
Posted on Oct 30, 2009
1.) Open the hood of your van
2.) On the passenger side of the vehicle, look behind the headlight enclosure. You will see a set of wires running into the back of it. This is the power clip. Either with your hand or a flat-head screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.
Posted on Nov 06, 2009
Open hood. Remove 3 bolt holding headlight housing. When housing is out, remove the retaining ring by twisting counterclockwise. Pull out bulb, replace. When installing the retaing ring make sure all 3 tabs go in there slots & under the ring
Posted on Jan 20, 2010
Tips for a great answer:
Nov 30, 2012 | 2001 Dodge Caravan
Feb 24, 2011 | 2000 Dodge Caravan
Jan 23, 2011 | Dodge Caravan Cars & Trucks
Oct 17, 2010 | 1996 Dodge Caravan
Aug 26, 2009 | 1993 Dodge Dakota
Aug 30, 2008 | 1993 Dodge Caravan
Oct 21, 2017 | Dodge Cars & Trucks
56 people viewed this question
Usually answered in minutes!