Question about Cars & Trucks

Open Question

Remove instrument cluster on 1989 vw fox - Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Instrument cluster wiring 1989-1990 vw cabriolet

Not sure what the other wires go to, maybe the air bag, regardless all instruments are working on the '89.

Posted on Aug 02, 2008

  • 4 Answers

SOURCE: Motor Oil 1989 vw fox

I use 20w-50 non-synthetic aka Dinosaur oil in my 89 wagon year round, but he's a picky old brute and i live in warm california.

Posted on May 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1989 gmc has no illumination of instrument cluster


Just a guess... I would remove the instrument cluster and replace the bulbs behind the instrument cluster. its like a 2 dollar fix. Newer model has LEDs which harder to replace. Older models are just basically light bulbs. you can buy them at auto stores like autozone and oreiley's

Sep 08, 2017 | GMC Cars & Trucks

1 Answer

Where can I find a working instrument cluster for a 1985 VW Cabriolet?


vw wreckers will have clusters that are in good condition

Apr 09, 2016 | Cars & Trucks

2 Answers

How do I change the dash lights in my 1997 ford crown victoria? I took out all the screws but still cant get the cover off to get to the bulbs. URG!!!


REMOVAL & INSTALLATION Conventional Cluster Fig. 1: Remove the trim screw covers on the driver's and . . . 89606p41.jpg
Fig. 2: . . . passenger side of the instrument cluster 89606p42.jpg
Fig. 3: Remove the upper trim panel retaining screws 89606p43.jpg
Fig. 4: Remove the headlight switch knob 89606p44.jpg
Fig. 5: Detach the electrical connectors for the trim panel and remove it from the vehicle 89606p45.jpg
Fig. 6: Remove the instrument cluster retaining screws from either side of the cluster 89606p46.jpg
Fig. 7: Remove the transmission range indicator cable 89606p47.jpg
Fig. 8: Slide the cluster out and detach the electrical connectors and . . . 89606p48.jpg
Fig. 9: . . . . remove the instrument cluster from the vehicle 89606p49.jpg
  1. Disconnect the negative battery cable.
  2. On 1989 vehicles, disconnect the speedometer cable. On 1989 Crown Victoria and Grand Marquis, remove the headlight switch knob and shaft assembly.
  3. Remove the instrument cluster trim cover attaching screws and remove the trim cover.
  4. Except 1992-98 Grand Marquis, remove the lower steering column cover retaining screws and remove the lower cover. On 1992-98 Grand Marquis, remove the knee bolster retaining screws and remove the knee bolster.
  5. On all except 1992-98 Grand Marquis, remove the lower half of the steering column shroud.
  6. Remove the screw holding the transmission range indicator column bracket to the steering column. Detach the cable loop from the pin and cane shift lever. Remove the column bracket from the column.
  7. Remove the 4 cluster retaining screws. Disconnect the cluster feed plugs from the receptacle and remove the cluster assembly.
  8. Installation is the reverse of the removal procedure.
Electronic Cluster NOTE: The electronics within the electronic instrument cluster are not serviceable. In the event of an electronic failure, the entire instrument cluster must be replaced or returned to the manufacturer for repair.
  1. Disconnect the negative battery cable and set the parking brake.
  2. Unsnap the center moulding on the left and right sides of the instrument panel. Remove the steering column cover and column shroud.
  3. Remove the knobs from the auto dim and auto lamp switches, if equipped. Remove the 13 screws retaining the instrument panel and pull the panel out.
  4. Move the shift lever to the 1 position, if required, for easier access.
  5. Detach the electrical connectors from the warning lamp module, switch module and center panel switches, if equipped.
  6. Remove the instrument cluster carefully so as not to scratch the cluster lens. Detach the electrical connector from the front of the cluster.
  7. Disconnect the transmission range indicator assembly from the cluster by carefully bending the bottom tab down and pulling the indicator assembly forward.
  8. Pull the cluster out and detach the electrical connectors on the rear of the cluster. Remove the instrument cluster.
  9. Installation is the reverse of the removal procedure.
prev.gif next.gif

Sep 18, 2010 | Ford Crown Victoria Cars & Trucks

1 Answer

What wires go where on an 89 vw fox starter


The battery cable and the cable from the alternator go to the large terminal, with the 13mm nut on it. The small plug goes to the spade connector to the right.

Jan 23, 2010 | 1989 Volkswagen Fox 4 Door

1 Answer

Vw fox lights do not go on despite changing fuses and relays


Try testing the switch and then the relay. Usually its the switch. Use a flat screw driver to pull it s out of there connector. Use a jumper wire and shop manual to jump the terminals and see if the lights come on. If they do its the switch.
The relay you check for continuity and resistance.

Aug 12, 2009 | 1989 Volkswagen Fox 4 Door

2 Answers

Motor Oil 1989 vw fox


I use synthetic, but that's your choice... I use 10w-30 in winter and 20w-50 in summer

Apr 19, 2009 | 1989 Volkswagen Fox 4 Door

1 Answer

Oil sensor light


There is no Way to Bypass it. Did you get the Owners Manual with the Car????

Jan 31, 2009 | 1991 Volkswagen Fox

1 Answer

1989 toyota camry taillight and instrument cluster lights don' t work


the fuse for the tail lamp/instrument cluster may be bad.

Oct 06, 2008 | 1989 Toyota Camry

1 Answer

Instrument cluster wiring 1989-1990 vw cabriolet


Not sure what the other wires go to, maybe the air bag, regardless all instruments are working on the '89.

Aug 01, 2008 | 1990 Volkswagen Cabriolet

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...