Question about Jeep Cars & Trucks

1 Answer

Right headlight not working full beam only

My right headlight is not working only full beam works the left side is fine . I have changed the fuse and the bulb ?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 29 Answers

You need a new bulb, most have a double filament.

Posted on Oct 10, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 104 Answers

SOURCE: Right headlamp doesn't work on low beam only

in this case make sure you have voltage going to the low beam lights. 12 volts. you need a volt meter. if you do not have volatge you have to check and make sure power is going through the fuse. a bad fuse will be broke, but you can have a good fuse with no power going through it. if you have power going through the fuse you have a wiring open somewhere between fuse and whatever is between the headlight connecter.

plz check and get back i will keep checking on here on and off.

Michael
ASE certified
PLZ rate

Posted on Feb 09, 2009

  • 260 Answers

SOURCE: Low Beam

Make sure you have a good switch
bulbs good
relay and or fuse is good

Posted on Apr 11, 2009

  • 1130 Answers

SOURCE: Left low beam headlight on Chrysler 2003 T&C wont work while engine is on

Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.

Posted on Apr 18, 2009

ghost4548
  • 776 Answers

SOURCE: 1997 Hyundai Accent is acting funny in the

There's only one relay, but two fuses, both located in the underhood fuse/relay box.

53ee18a.jpg Sounds like you have a wiring problem since sometime the left works and the right doesn't, then the right works then the left doesn't. Might be the multi-function switch on the steering column in combination with the connector M10-1, EM01, SE14 & 16.

Posted on Jun 28, 2009

  • 1 Answer

SOURCE: Audi A4 2002 Low beams & Right front turn signal stopped working

but on 2002 A4, F20 and F21 are empty! Does anyone has an idea where the headlight fuses located?

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dim headlight one side


Check voltage to lamp assembly. Could be a relay, a bad wire, or a bad connector. Since one headlamp works correctly, the switch assembly probably works. Without a wiring diagram. I can't tell whether the headlights get power directly from the switch or not... Time to buy a manual.

Apr 01, 2014 | Chevrolet Equinox Cars & Trucks

2 Answers

Help Only one headlight working


It could be a broken wire on the wire harness or a bad fuse.

Mar 11, 2014 | BMW 1 Series Cars & Trucks

1 Answer

Headlight relay traverse


My 2011 Traverse had no LOW BEAMS ( Right and Left Side )
I changed the LOW BEAM RELAY ( a 4 prong relay ) in the fuse / relay box located under the hood on the passenger side. It didn't change the situation. Voltage was good at the relay terminals and I plugged the relay into another GM car and it worked fine. The NEXT place the voltage goes to is the LOW BEAM HEADLIGHTS. The easier way to change them on a 2011 Traverse is to go through each wheel well - there is an access port behind the wheel well liner. YouTube has photos and videos on how to take this apart. Don't try to attack the problem from above in the engine compartment, the wheel well is the easier ( notice I said easier not easy ) way to go about it. BOTH of my Low Beam headlamps driver side and passenger side were burned out. I just bought the vehicle ( yeah...I know...who doesn't check the lights before buying a vehicle - right ? ) and at my wits end figured that it is such a pain in the rear to change the bulbs, that the lazy bastards that owned the vehicle just drove with one headlight and THEN the second one went out. If you can hear your low beam relay clicking ( you can feel it too if someone turns the headlights on with the key in the ignition turned to ON ) and you're getting 12 volts or higher at the relay terminals in both places ( the relay coil power and relay output terminals ) then the only thing next is the bulbs themselves. Thank God for small miracles. NOBODY likes an electrical / electronics problem.

Nov 21, 2012 | 2009 Chevrolet Traverse

2 Answers

Dodge ram 3500 turn signal - headlight problem


WAY TO GO !!! another "great idea" from vehicle manufactures

Jun 07, 2012 | 2004 Dodge Ram 3500 Truck

1 Answer

I have a 2008 f250. one headlight (driverside) low beam is not working. I have checked both fuses 10amp and they are good. The flash to pass works and both lights on bright, right and left come on. the...


I am sure that a 12 Volt bulb means it needs 12 Volts. Since you changed the bulb to the other side, why not check the voltage in the working side and see what it reads?

Sometimes the turnstalk can interfere with the lighting. Try pushing the Hazard switch several times and see if the headlights straighten out. I read that too much goes through the turnstalk and that using the Hazards can derail a contact inside the stalk.

If this does not help, you may need a headlight relay in the powerbox. One contact may be dirty or burned down for the wire it feeds. Unless you have a single wire feeding both low beams to the headlights, I would bet the left and right side come out directly through the relay.

Oct 20, 2010 | Ford F-250 Cars & Trucks

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

1998 toyota rav 4. Right side low beam headlight doesn't work. Hi beam on that side does. Checked fuses, they appear OK, and tried 2 other headlights. Left side hi and low working fine.


sounds like there is a broken wire. the only advise i can give you is to follow the hot wire for that light untill you find the break in the wire.

Dec 25, 2009 | 1998 Toyota RAV4

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...