Question about 2004 Mazda 6

Open Question

Where is the camshaft sensor located on a 2004 Mazda 6? I ran an OBD and it gave me a p0340 code.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2004 mazda 6 starter

the starter is located on top of the engine, underneath the battery and battery tray. they must be removed to gain access to the starter

Posted on Feb 08, 2009

c17hydro
  • 2984 Answers

SOURCE: I have a Mazda 3 2004. Coolant Sensor Location

a2fa239.jpg
This is what it looks like and look for the connector.

Posted on Mar 15, 2009

  • 155 Answers

SOURCE: 2004 mazda MPv Where is the location of cyl. #6?

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.

Posted on Jun 08, 2009

emissionwiz
  • 75066 Answers

SOURCE: Where is the bank 2 o2 sensor located on a 2004

bank 2 is the cylinder in the front of the engine compartment near the radiator, the O2 is either in the exhaust manifold of the bank or in the exhaust pipe off the manifold, round about the size of a jumbo magic marker, you need a special O2 sensor socket to remove it in some cases, if it is in the open then a 7/8 open end wrench will work.

Posted on Oct 09, 2009

Testimonial: "Awesome response time, this was exactly the information I needed."

  • 14036 Answers

SOURCE: where is a fuel filter located on a 2004 mazda 6

FUEL FILTER IS PART OF THE FUEL PUMP ASSEMBLY.

Posted on Oct 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 chyrsler 300m it went in limp mode codes p0700. P0340 p0344 p0430 p0888 came up cleared the codes and now it knocks.


clearing codes wont correct the problem and limp mode is designed to protect motor and transmission - p0700 is a transmission problem
P0700 Transmission Control System Malfunction p0340 is camshaft position sensor malfunction
https://www.obd-codes.com/p0340 p0344 is also a camshaft position sensor circuit problem
P0344 Camshaft Position Sensor Circuit Intermittent your p430 is a cat converter problem
https://www.obd-codes.com/p0430 and p0888 is transmission relay problem these reasons are limp mode the knock can be fuel not burning correctly or a lower engine knock can mean you damaged a piston

Nov 08, 2016 | Cars & Trucks

2 Answers

Code P0340.


camshaft position sensor circuit malfunction---check the connection and wiring around and to the sensor the following link can assist you with the trouble shooting
http://www.obd-codes.com/p0340 P0340 Camshaft Position Sensor Circuit Malfunction http://www.myautorepairadvice.com/p0340.html

Aug 19, 2016 | Cars & Trucks

1 Answer

What are the probable causes of DTC P0340 other than a defective CPS?


Symptoms can include: Hard starting or no start
Rough running / misfiring Loss of engine power Causes
A code P0340 could mean one or more of the following has happened:
a wire or connector in the circuit could be grounded/shorted/broken the camshaft position sensor may have failed the PCM may have failed
there exists an open circuit
the crankshaft position sensor may have failed

Possible Solutions With a P0340 OBD-II trouble code,
diagnosis can be tricky at times. Here are some things to try: Visually inspect all the wiring and connectors in the circuit Check for continuity in the circuit wiring Check the operation (voltage) of the camshaft position sensor Replace the camshaft position sensor as required Check the crankshaft position circuit as well Replace circuit wiring and/or connectors as required Diagnose/replace the PCM as required

Read more at: http://www.obd-codes.com/p0340
Copyright OBD-Codes.com

May 06, 2016 | Nissan Maxima Cars & Trucks

2 Answers

Can u tell me what the problem of this code PO340


I have a 1999 BMW 740 il My SES light came on so I hooked up my OBD code reader p0340 - Camshaft Position Sensor Circuit Malfunction is what came up. so I went to the BMW parts department and bought the Camshaft Position Sensor.
I Replaced the with the new. My SES light was still on so I hooked up the OBD reader again hoping it may reset my SES light but it didn't what did happen is the OBD reader came up with the same code (p0340 - Camshaft Position Sensor Circuit Malfunction) witch is what I just replaced. now I'm at a loss. I'm not sure how to reset my SES light and if I just replaced the Camshaft Position Sensor why dose it the OBD code p0340 still come up. Any suggestions?

Mar 18, 2011 | 1996 Nissan Altima

2 Answers

Suzuki grand vitara (J20A) and error code P0340. What is it?


p0340 is indicating a problem with the CMP sensor .. thats "camshaft position sensor" ... the 340 would indicate that the sensor is open or shorted (not giving information) ... look for disconnected or defective CMP or CAMP sensor ..

Dec 23, 2009 | 2004 Suzuki Grand Vitara

1 Answer

My 2004 dodge neon sxt is giving me a p0340 code how do i fix this


A code P0340 could mean one or more of the following has happened:

  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed

With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:

  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

Hope this is for any assistance.

Dec 13, 2009 | 2004 Dodge Neon

1 Answer

Code p0340 need location on 2004 sebring 2.7 v6



P0340 OBD-II Trouble Code
Technical Description
Camshaft Position Sensor Circuit Malfunction


What does that mean? This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft position sensor) and think that will definitely fix it.

Symptoms
Symptoms can include:
  • Hard starting or no start
  • Rough running / misfiring
  • Loss of engine power

Causes A code P0340 could mean one or more of the following has happened:
  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed

Possible Solutions With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

Also, the cams/crank are out of alignment, thats why you are getting a cam position code (P0340). For more details about your model, you can visit autozone.com (free register)

Hope helped whit this (remember rated this help) Good luck.

Oct 23, 2009 | 2004 Chrysler Sebring

1 Answer

OBD gave code for camshaft position sensor-how to replace?


haynes should have a manual on this car, which will show the location of the cam pos sensor. check autozone or napa

Apr 29, 2009 | 2000 Suzuki Esteem

Not finding what you are looking for?
2004 Mazda 6 Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...