Question about 1996 Kia Sephia
What sensors do you mean depending on engine type can but upwards of 20. these include temp /fuel/speed/knock(can be 4 of these)/cam/crank/air intake/cat (can be 2-4 of these)/oil/pressure (oil & fuel)/emissions/idle/rev/gearbox/gears selector/ and there can be more
Posted on Oct 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The four speed automatic shows a total fill (that is all the fluid it can hold) is 5.7 Quarts. So if you just dropped the pan and relplaced the filter, you shouldnt need more than 4 quarts and likely you would have a little extra with that.
Posted on Dec 30, 2008
SOURCE: 2000 kia sephia clutch
this is a big job for someone who is not mechanically inclined but....here it goes go buy a new clutch new tranny fluid and a haynes manual at the auto parts store your going to have to drain and drop your tranny ... BUY THE CLUTCH WITH THE TOOL theres an alignment tool needed to align the plates n bearings start by pulling off both tires, brakes and both cv axels be sure to remove the intermediate shaft from the tranny on the passenger side (should come out with the axel passenger side only) so do yourself a favor and buy an impact gun with at least 500 ft lbs torque youll need it also have handy your 14mm 17mm and 19mm impact sockets and remember this job usually runs around 1,200 bucks at firestone also DO NOT remove the bolt in the middle of the front springs under the hood just the four around it and the will pop out no prob and wont need to be clamped remove the starter behind your engine its under the oil filter also if your new to this sorta thing its gonna take you about 3 days to do it buy the impact gun if ur in a hurry look at a pawn shop have your flywheel machined its going to be accessible and it needs it hope this helps dont forget the book which you should already have bought anyway its good for your torque specs which you will also need a torque wrench for the clutch also dont crack open ur tranny this isnt a honda
Posted on Jan 05, 2009
SOURCE: 2000 Kia Sephia
it is the catalytic converter my answwer is 100 percent sure the catalytic converter gets clogged and does all of those also i have 1 same thing trust me
Posted on Feb 11, 2009
hi..you can get the diagram from the following
check it out..
Posted on Feb 22, 2009
any aftermarket brake fluid will be fine. the actual grade is located on the top of the fluid cap. you can find the universal grade at your local auto parts shop.
Posted on Mar 01, 2009
Tips for a great answer:
Jan 12, 2016 | 2000 Kia Sephia
Feb 17, 2015 | 2000 Kia Sephia
Apr 15, 2012 | 2000 Kia Sephia
Apr 05, 2010 | 2001 Kia Sephia
Sep 25, 2009 | 2000 Kia Sephia
Jun 16, 2009 | 1997 Kia Sephia
Jun 15, 2009 | 2000 Kia Sephia
May 04, 2009 | 2000 Kia Sephia
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: