Question about 2003 Hyundai Tiburon

1 Answer

Clutch problem. clutch will not get into gear

I have a 2002 hyundai coupe 2.7 V6 , the clutch will not get into gear when the engine is running and will only go into gear when the engine is off. To drive the car i need to put it in first gear when the engine is off and then start the car. sometimes it will only go into gear with force when car is doing less than 2000 revs

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 243 Answers

You definitely need to eithr bleed the clutch or change the master/slave.

Posted on Apr 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got a hyundai fx coupe 97 and I put my foot on the clutch it moves about 2-3 inches and that's it. its hydolic clutch

My friend it is a serious matter either your gear plate is jamed so please go to the servise center of hyundai fx......................

Sep 22, 2014 | Hyundai Motor 1997 Tiburon

1 Answer

2004 Tiburon GT 6speeds not going into 6th gear

I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.

Sep 25, 2017 | 2004 Hyundai Tiburon GT V6

1 Answer

Problems selecting gears on a hyundia coupe. it seems more difficult when car is cold

I assume you're referring to a standard transmission (clutch pedal w/manual shifter)? Some of the most common problems w/this powertrain component are
1. low fluid level in the clutch master cylinder
2. Worn clutch disk and or dual mass flywheel.
3. leaky/worn clutch slave cylinder.

Least common

1. worn sychronizers inside the trans
2. worn/beveled cones-to-primary (or) primary synchronizer cone to secondary synchronizers. Some transmissions were designed with dual synchronizers.

Best advice is to have a qualified/certified Hyundai Service Technician properly diagnose the drivability issue you're having.

Aug 27, 2011 | 2003 Hyundai Tiburon

1 Answer

Hyundai Coupe 2.7 V6 auto 2002 I have a problem starting my coupe. This is an intermittent problem and has no pattern. so frustrating :( She will turn over but will not start, it take 2-5 times of key...

Main fuel line from tank to fuel pump, Sounds like the pump is sucking the fuel and air is getting in also, only when the fuel system is pressurised and the return line is sending fuel back to the tank will the air pressure in the tank be higher than the outside atmosphere and then air will no longer be sucked into the system - if this is true there will be a fuel leak - maybe only a little - to find if there is a leak, start the car on level ground, turn off the engine and restart it several times, then move the car back and check on the ground for any fuel - also check under the bonnet and sniff around for any strong petrol smells - there will probably be a fuel pipe damp with petrol - tell me what you find - if it is or isn't leaking I can give you the next steps to identifying the problem -

Jan 26, 2010 | 1995 Hyundai Elantra

2 Answers

Every time i unlock my hyundai coupe it relocks its self its a 2004 v6 model

the accent does not have a v6 eng. but if it is an accent, with power locks, sounds like a bad power door lock actuator.

Oct 18, 2009 | Hyundai Motor 2004 Accent

1 Answer

2002 Hyundai Coupe 2.7L V6 clutch problem

Hi what your going to have to do is. unhook your slave cly and take a pry bar and pry the fork bar towards the front of the car you will hear a click. that means you have poped the throw out bearing into the plate. You did nothing wrong they just have to be popped in.

Mar 02, 2009 | 2003 Hyundai Tiburon

1 Answer

Change spark plugs on hyundai coupe v6 2.7 2002

To change the sparkplugs you have to actually remove the black and silver shield, then take the headers off. There are bolts hidden under the middle silver pieces, they pop right out. There is also a bolt under the Hyundai H logo on the cover.

Nov 18, 2008 | 2003 Hyundai Tiburon

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides