Question about 2008 Nissan Titan

Open Question

Front driver's side power seat won't adjust forward or backward...all other controls seem fine just stuck in the forward position after my wife drove it, of course!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: The Lumbar support adjustment fails

I wonder if you dont have a bad switch. I had a similar problem on my car except that it was the heated seats that would not engage... the power seat buttons all worked just fine. I changed the switch and it fixed the problem...

Note: this was on a BMW not a Murano

Posted on Dec 31, 2008

Ad
  • 4 Answers

SOURCE: The lever to move the driver's seat forward and backward doesn't

The reason is that your sliding grips have been slipped and therefore jammed at one position.

Remove the seat open it's sliding grips and replace it.

Posted on Mar 12, 2009

emissionwiz
  • 76691 Answers

SOURCE: Drivers side power seat is stuck.

THERE IS NO WAY TO OVERIDE WITH TAKING THE WHOLE THING APART, HOW DO U KNOW IT IS THE SWITCH? THERE ARE MULTIPLE MOTORS IN THE SEAT TRANSMISSION ONE OF THESE COULD BE DEFECTIVE, THE SWITCH IS EASY TO TEST GET A TEST LIGHT AND TEST IT.

Posted on Jul 18, 2009

  • 82 Answers

SOURCE: driver,s seat no longer slide forward and backward

Check for obstuction on seat track or try listening to see if you can hear seat motor operating. if you can't hear motor operating check fuse.

Posted on Mar 21, 2010

fingaz22
  • 1068 Answers

SOURCE: 2001 Nissan Altima front power seat does not move

needs a forward/rearward motor. it has two separate motors under the seat. very common and i replace them all the time. good luck

Posted on Mar 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The front seats for our 2003 Escalade will not move forward or backward and the heat control for the front seats will not work.


Does your Escalade have memory seats ?
There are 2 options of power seat systems available in full size trucks. The 6 way driver and passenger power seats, and 8 way driver and passenger power seats with driver memory. For the driver memory seat operation refer to Memory Seats Description and Operation . Power seats without memory are completely controlled through the power seat switch. Battery voltage is supplied to the power seat switch through the power seat circuit breaker. While the seat adjuster switches are in an inactive state the switch contacts are closed to the power seat switch ground circuit. When a power seat switch is pressed to an active state the switch contact is closed to the battery voltage supply circuit. Each seat adjuster motor is controlled by the power seat switch through 2 motor control circuits. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by which of the adjuster motor control circuits is switched to battery voltage while the other remains grounded.

Jan 16, 2017 | 2003 Cadillac Escalade

1 Answer

Can a manual seat replace the power seat - camry, 1999 front driver seat


Yes, if you purchase a manual set is will bolt in just the same so long as its the same model and year as they do change from year to year.

Jan 12, 2015 | 1999 Toyota Camry

1 Answer

2006 KIA Optima EX Passenger Power Seat won't adjust back


seat motor is no good and needs replaced if switch is working in each position

Jul 29, 2012 | 2006 Kia Optima

1 Answer

GMC Yukon Seat Switch


You don't mention what year your Yukon is ? This could very well be a control Module problem .
I'll post how the power memory seat's work or are suppose to work !

Memory Seats Description and Operation

Battery voltage is supplied to the memory seat module through a 25 A circuit breaker. The memory seat module supplies the seat adjuster switch assembly with a battery positive reference voltage. While the seat adjuster switches are in an inactive state the switch contacts are closed to the adjuster switch common circuit. When a seat adjuster switch is pressed to an active state the switch contact is closed to the reference voltage circuit. Battery voltage on a switch signal circuit indicates to the memory seat module the switch status is active. Each seat adjuster motor is controlled by the memory seat module through 2 motor control circuits. While the seat adjuster motors are in an inactive state the motor control circuits are closed to ground circuit contacts within the memory seat module. The memory seat module operates the seat adjuster motors by switching one of a motors control circuits to battery voltage. The seat adjuster motors are bidirectional and the direction of adjuster motor rotation is determined by which of the adjuster motor control circuits is switched to battery voltage while the other remains grounded.


Memory Set/Recall Operation
The seat adjuster motors are equipped with internal position sensors. The adjuster motor position sensors are monitored by the memory seat module and are used to determine the seat position when storing or recalling memory settings. The driver seat adjuster motors use potentiometer type position sensors. The position sensors are supplied with a 5 V reference and ground circuits from the memory seat module. The position sensor signal circuits return to an analog input within the memory seat module. During adjuster motor operation the position sensor provides a voltage change proportional to the change in revolution of the adjuster motor shaft. The memory seat module monitors the voltage from the position sensor signal circuits to determine the adjuster motor positions when storing or recalling memory seat position settings.
The memory recall switch assembly on the driver door provides inputs to the driver door lock/window switch. Battery voltage is supplied to the memory recall switch assembly from the driver door lock/window switch. When a RCL 1, RCL 2, or EXIT switch is pressed, the switch contacts close the appropriate switch signal circuit to the battery voltage supply circuit within the memory recall switch assembly. When the driver door lock/window switch receives active switch signals from the memory recall switch assembly, the appropriate commands are sent to the memory seat module using the GMLAN Serial Data circuit. The Body Control Module software version determines the personalization features available.
Memory seat recall operation is allowed only with the transmission selector lever in the PARK position while the ignition is on. The transmission selector lever position data is provided to the memory seat module by a message through the GMLAN Serial Data circuit.

There are somethings listed you are not familiar with , like GMLAN Serial Data circuit ,maybe Body Control Module software etc... GMLAN is a communincation network that the computers on the vehicle uses to share information , transmit commons etc... you can google it to read about it .

There are DTC'S - diagnostic trouble codes that can set in the module in control . Do you know what DTC'S are .

DTC Descriptors
DTC B1825 01: Driver Seat Recline Position Sensor Circuit Short to Battery
DTC B1825 06: Driver Seat Recline Position Sensor Circuit Short to Ground or Open
DTC B1825 5A: Driver Seat Recline Position Sensor Circuit Plausibility Failure
DTC B1850 01: Driver Seat Lumbar Horizontal Position Sensor Circuit Short to Battery
DTC B1850 06: Driver Seat Lumbar Horizontal Position Sensor Circuit Short to Ground or Open
DTC B1850 5A: Driver Seat Lumbar Horizontal Position Sensor Circuit Plausibility Failure
DTC B1860 01: Driver Seat Lumbar Vertical Position Sensor Circuit Short to Battery
DTC B1860 06: Driver Seat Lumbar Vertical Position Sensor Circuit Short to Ground or Open
DTC B1860 5A: Driver Seat Lumbar Vertical Position Sensor Circuit Plausibility Failure
DTC B2355 01: Driver Seat Front Vertical Position Sensor Circuit Short to Battery
DTC B2355 06: Driver Seat Front Vertical Position Sensor Circuit Short to Ground or Open
DTC B2355 5A: Driver Seat Front Vertical Position Sensor Circuit Plausibility Failure
DTC B2365 01: Driver Seat Rear Vertical Position Sensor Circuit Short to Battery
DTC B2365 06: Driver Seat Rear Vertical Position Sensor Circuit Short to Ground or Open
DTC B2365 5A: Driver Seat Rear Vertical Position Sensor Circuit Plausibility Failure
DTC B2375 01: Driver Seat Assembly Horizontal Position Sensor Circuit Short to Battery
DTC B2375 06: Driver Seat Assembly Horizontal Position Sensor Circuit Short to Ground or Open
DTC B2375 5A: Driver Seat Assembly Horizontal Position Sensor Circuit Plausibility Failure

5) Memory Seat Module is under the front of the driver seat , you could look under an see if all the connectors are fully seated.

The best diagnostic step would be to hook up the factory scan tool an see what the computer is seeing as far as inputs from the switch an outputs it's sending . I wouldn't suggest you take the seat apart an try testing electrical inputs etc.... unless you very familiar with automotive electrical systems an circuits .

Mar 06, 2017 | GMC Cars & Trucks

1 Answer

Drivers seat 2000 outback


So here is a diagram of the seat circuitry for your car. Since every other function works except the forward/backward slide function, that leaves basically the forward/backward slide motor, the seat switch, and/or the wiring. If you can verify that the wiring under the seat is in good condition without obstructions, chaffed wires, and/or wires pulled too tight, then it's safe to say it's down to just the motor and/or the switch. Sometimes if the passengers front seat has the same switch, you can plug it in to the drivers' side connector and see what works and what doesn't. If the seat works fine with the other switch, then that's all it needs, if not then it will need a motor. If the other seat doesn't have a switch then you can find them at wrecking yards, or just supply power and ground to the motor in question to see if it works. If it does, then you know you kneed a switch and if not then a motor.
I hope this info helps!~subyguru~
82066173

Nov 14, 2011 | 2000 Subaru Outback

1 Answer

Power driver's seat only travels forward and backward on one side of seat. Other side works fine. Seat does travel up and down properly.


Power seat movement is controlled by numerous small motors underneath the seat.

Front and back movement is often actuated through a motor on one side that connect to a rod (with some type of gear on the end of it) that runs to the other side. This rod can get out of position, or possibly something can go wrong in the gear.

You'll likely have to remove the seat to diagnose the problem.

Oct 14, 2009 | 1996 Oldsmobile Ninety Eight Regency

3 Answers

Driver's seat unable to move forward or backward


There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.

May 19, 2009 | 2004 Infiniti G35 Sport Coupe

1 Answer

Bucket seat shifts forward and backward


i had the same prob when i got my durango.i set the seat where i was cumfortable and still where my wife could be cumfortable drilled two small holes on the side of the rail and shot two rivets through it.all the other controls work the same but it doesnt go back and forth anymore.works for me ,alot cheeper than a power seat.

Apr 12, 2009 | 1998 Dodge Durango

2 Answers

Front driver seat adjustments. Push control forward seat goes back; push control back seat moves forward. Easy exit feature moves seat forward


probably the switch is installed backward in its cover so remove the switch and rotate it and put it back

Nov 19, 2008 | 2005 GMC Yukon Xl Denali

2 Answers

Power Seat on Drivers side want go forward or backwards. It works in the other positions but now forward or backwards.


Good day;
What year is you car? Does the other controls work for the seat? and just to clarify the seat won't go forward of back?


Cheers

Aug 25, 2008 | 2001 Lincoln LS

Not finding what you are looking for?
2008 Nissan Titan Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...