Question about 1996 Chevrolet Beretta
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: can't open door
inspect the door hindge pins and busings it sounds like they are getting worn out and maybe due for replacement. also look and see if the spring in the hindge is still their. if all is well have the door adjusted properly to repair your problem.
Posted on Mar 22, 2009
Yes you can do this yourself BUT make sure you get the plastic clips to the lock rods before you order. That is what is probably wrong with the door handle.
Posted on Mar 23, 2009
There is a small clip that holds the outside door handle arm (inside the door) to the latching assembly, so the door panel has to be removed to reattach it. Sometimes the little clip is still attached to the handle arm, sometimes they are in the bottom of the door & sometimes you can't find them at all... Rick
Posted on Apr 13, 2009
the linkage behind the handle either the retaining clip broke or popped off need to remove the door panel to check and fix
Posted on Mar 13, 2010
Testimonial: "Thanks I thought it might be a cable or linkage. Much thanks"
SOURCE: door locks and power window
Just did this procedure I got from coloradofans.com forums:
"any type of power/voltage change seems to trigger this issue
The most common symptom is power locks fail and only the driver window quits, however that is on the extended cab.
Steps to fix and it works every time.
take door panel off driver's door
Disconnect the wiring attached to window and power lock control unit
disconnect battery cables
connect the negative to the positive cable(((NO BATTERY CONNECTED)))
This will act to short residual voltage in the system
5 minutes later
place the key in the ignition and turn to the run position
connect the wiring to the window/lock controller
connect the negative cable to the battery
then the positive
open drivers side door
turn key to the off position((do not remove yet)) you should get a series of dings through speakers telling you the key is still in the ignition
once it begins dinging pull the key out and you should hear the door lock solenoids trigger and the windows should work." - Coloradofans.com forums
Posted on Mar 20, 2010
Tips for a great answer:
Dec 02, 2015 | Cars & Trucks
Mar 23, 2013 | Volkswagen Golf Cars & Trucks
May 18, 2010 | 1995 Chevrolet Beretta
Feb 09, 2010 | 1996 Oldsmobile Cutlass Ciera
Jan 28, 2010 | 1996 Pontiac Grand Prix
Oct 09, 2009 | 1995 Pontiac Grand Prix
May 16, 2009 | 1998 Toyota Corolla
Apr 11, 2017 | 1996 Hyundai Sonata
Nov 12, 2008 | 1997 Toyota 4Runner
Sep 21, 2008 | 1996 Ford Explorer
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: