Question about Chevrolet Camaro

1 Answer

How do I determine if the rear wheel bearings are the problem on my 95 camaro.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 243 Answers

Hi there,
first thing you'll have to jack the rear wheels and put the car on axle stands both sides.
Put some good wheel chokes in front and make sure the car is sitting nice on the stands.
Check for any excess play at the wheel hub by moving it side ways and up & down.
Now start the car, put it in drive and let the wheel turn and carefully put your hand on the rear suspension and feel if you sense any "rough" noise or humming noise. This is how you can diagnose the rear wheel bearings.
Cheers

Posted on Apr 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the rear axel bearings on a 1988 Chevrolet IROC Z28 Camaro


Put car in neutral, remove wheels, calipers and rotors, diff. cover. rotate carrier until you see wrist pin retaining bolt, remove bolt and slide out the wrist pin out of carrier. Next push axle inward to remove inner axle "C" retainer washer then slide axle out of tube. Then pry off axle seal and with slide hammer w/attachment remove axle bearing.

Feb 23, 2014 | 1988 Chevrolet Camaro

1 Answer

2000 dodge caravan rear wheel bearing noise


Improve the FixYa experience for everyone by voting. I want you to let me know if the solution(s) suggested were of any value. Constructive criticism is welcomed.

Hi,

I'm Ben and -- hopefully -- I can provide some meaningful assistance.

Discussion

Replacing the rear wheel bearings on these vans is relatively simple pretty simple. However, the first thing that you must do is satisfy your self that it's the bearing and not something rubbing on a tire or something else back there in the rear.

Follow this steps to diagnose the problem:
  1. Jack up the rear of the car
  2. shake the wheel side to side and top to bottom.
  3. if there is any wobble in it then it is a wheel bearing.
  4. However, you cant alway tell by the shake test.
  5. You can also go down the road and swerve side to side (being careful of oncoming traffic).
  6. Iif you swerve to the right and the noise is loudest on the left side.
  7. If you swerve to the left and its louder its on the right side.

How to remove and replace rear wheel bearings.

Before servicing the vehicle, refer to the Precautions Section of your User Manual.

Remove or disconnect the following:
  1. Rear wheel
  2. Brake drum or caliper
  3. Wheel speed sensor, if equipped
  4. Hub and bearing assembly from the rear axle

To install:

Install or connect the following:

  1. Hub and bearing assembly. Tighten the bolts to 95 ft. lbs. (129 Nm).
  2. Wheel speed sensor, if equipped. Tighten the bolt to 105 inch lbs. (12 Nm).
  3. Brake drum or caliper
  4. Rear wheel

May 26, 2012 | 2000 Dodge Caravan

2 Answers

Have a 1996 camaro SS speed. i have replaced the rear end and filled it with mobil 1 rear end fluid with the limited slip additive and it whines at around 70 mph and also vibrates pretty bad.


There are bearings in the rear diff that make a "whining" noise it can be repaired by replacing the bearings. Here is how its done;

1. Jack up the rear end and support if correctly with jack stands.
2. remove the wheels and expose the axles
3. remove the differential cover and drain the differential
4. rotate the main gear inside and expose the take down bolt. (8mm)
5. remove the take down pin in the spline drive. 8mm nut
6. remove the axles and remove the main gear. then take out the bearings.
7. replace the bearings and reinstall the components in reverse order.
8. refill the differential.

Apr 26, 2011 | 1996 Chevrolet Camaro

1 Answer

Grinding sound in rear end when in motion


Brake or wheel bearing remove the wheel and check both it will be obvious if its the brake.

Jan 16, 2011 | 1994 Chevrolet Camaro

1 Answer

Remove &replace 95 accord rear wheel bearing


remove this items in this order(rear disc):
-remove rear wheel(the side you are replace)(19mm socket)
-remove brake caliper with cailper bracket(14mm socket)
-remove brake disc
-remove metal cover hub/bearing assembly with flathead screwdriver
-remove 36mm nut behind metal cover.
-pull hub/bearing assembly out.
note:sometime the inner side of bearing stay on knuckle and you have to pry it out pry bar. check old bearing vs new bearing and you'll see the different. Don't reuse any parts of the old bearing.
-install new hub/bearing

Dec 15, 2010 | 1995 Honda Accord

1 Answer

How do you repair the rear end inner and outer wheel barrings on a 95 buick century wagon?


Take the wheel off. Remove wheel speed sensor wires at the back of bearing assembly. Remove the torx bolts to remove bearing.honeymokey_2.jpg

Dec 13, 2010 | 1995 Buick Century

1 Answer

Rear end drive gears worn on 95 chevy camaro z 28 causes roaring;grinding noises during operation in all gears ;six speed manual


Make sure it is not just a axle bearing . remove the shaft and rear wheels and brake drums ( if not disc) if disc remove the caliper and rotate the axles listen and feel for roughness.

Aug 29, 2009 | 1995 Chevrolet Camaro

1 Answer

RELACING WHEEL BEARINGS IN A 95 JEEP GRAND


Front wheel bearings can be done at home rear wheel bearings will require a hydraulic press and an axle puller. Either job can be difficult depending on amount of rust and availability of tools. The front wheel bearings are an assembly and once the jeep is up on jack stands, with the tires, brake calipers, and rotors removed, it is only a matter of removing the axle nut and 3 bolts (which can be difficult depending on rust) holding in the old bearing assembly

Feb 22, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Need to know how to change rear wheel bearing in a 95 suburban


jack & support vehicle. remove rear axle cover drain fluid, removeleft rear tire drum/rotor brakes, remove bolt in axle housing that holds the 3/4 inch pin in place pull pin , push left axle shaft inwards and remove c clip from inside axle case,slide out axle shaft,remove seal,remove bearing and install in revers

Jan 16, 2009 | 2003 GMC Sierra

2 Answers

1995 Toyota Celica Front Wheel Hub


can u replace the bearing in the hub? will that fix your problem?

May 25, 2008 | 1995 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...