Question about Mercedes-Benz CLK

1 Answer

How do I rest the Service indicator for a 2005 CLK Cabriolet? None of the suggestions listed below worked for me.

Posted by on

  • Jim Blowers
    Jim Blowers Oct 13, 2013

    "rest" should be "reset", referring to the A Service indicator

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 41 Answers

First make sure all of the doors, hood, trunk, etc are closed.
Turn the key to position 1
Press system select button(lower left buttons on the steering wheel) that looks like sheets of paper until you see mileage reading or temperature displayed.

Press the brightness button on the lower left instrument cluster 3 times. You should hear a signal and see voltage on the display.

Turn the key to position 2

Press the lower scroll forward/back button(steering left arrows)). You should see "service indicator" on the screen

Press the Brightness button again once. You should see oil type on the screen.

Select the oil grade you used by pressing the + & - buttons on the upper right on the steering wheel.

Press the scroll forward/backward button to confirm. Confirm oil reset, press R(brightness button on lower left on cluster) for 3 seconds should appear on the display.

Service confirmed should appear on the display.

Press the upper forward/backward button & "service indicator" appears on the display.

Press the upper system select button(lower left steering wheel button on left) The display should go back to basic mileage or temperature.

If all else fails. I believe the shortcut I took as a tech was, turn the key to the first position, scroll until you see the temperature or mileage displayed. Turn the key off, push in the brightness button and HOLD it while turning the key to the 2nd position. You should see something like do you want to reset service? press R(brightness) button for 3 seconds and it should reset.

Good luck. The newer cars are worse.

Posted on Oct 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Back head rest will not go back down


There should be a release button located on either side of the headrest on the seat itself and if you press it the headrest should go back in to the desired position

Jan 19, 2011 | 2005 Mercedes-Benz CLK

1 Answer

Where can I get chassis drawings or repair manual for my CLK 320 Elegance Cabriolet model 2000? I need to uninstall the radio system for upgrade.


all you need is the radio keys to remove the radio. If the radio has two little slots in the bottom corners is the way to tell if thats all you need. Any good Mercedes repair shop should have the radio keys and should be able to pull it out for you at no charge. It only takes seconds to do.

Oct 23, 2010 | 2000 Mercedes-Benz CLK

1 Answer

How do I reset the service indicator on the dash...2003 clk 430 mercedes


NOTE: These instructions apply to vehicles that are currently due a scheduled service. Manual resetting of the service interval indicator may not be possible if the time or distance covered is outside the programmed parameters of the vehicle. In this case, it may be necessary to use manufacturer's or equivalent diagnostic equipment.
Switch ignition ON and immediately press button [A] twice 42039. Switch ignition OFF. Press and hold button [A] while switching ignition ON. After 10 seconds the new interval will appear in the display accompanied by a beep. Release button [A]. Switch ignition OFF.

BUTTON A is trip reset.


Jan 01, 2010 | 2003 Mercedes-Benz CLK-Class

1 Answer

Mercedes CLK Exhaust problem


hi, the problem you are having sounds like the exhaust hasnt been ligned up properly when it has been fitted.
Or it could even be that the rubbers the exhaust rests on could be worn and need replacing.

If you hold the end of your exhaust at the back of the car give it a shake and see how tight it is, their should only be slight left to right movement if their is alot of movement then get the rubbers looked at. If their is only slight movement then the chances are the exhaust has not been lined up properly when it was fitted.

If your car had no problem before then the chances are it is the exhaust so i would check its ligned up and also check all the exhaust mounts are in place and that the rubber clamps holding the exhaust to the car are not worn as to much wear can cause the exhaust to vibrate.

One other thing to look at is the heat shield just above the exhaust if this has been bent then this could be touching your exhaust slightly causing the vibration this can be bent back so it is not touching the exhaust.

Let me know how you get on or if you need further assistance ok

Aug 22, 2009 | 2000 Mercedes-Benz CLK

2 Answers

S Reg VW Golf cabriolet roof has stopped working its doing nothing at all fuses seem fine and wires all in place any suggestions?


My S Reg VW Golf Cabriolet roof has stopped working - I can hear the motor buzzing - but no action ! Any suggestions ? The car has recently had a full service.

Jul 02, 2009 | 1996 Volkswagen Golf

1 Answer

Need new battery for clk 230 cabriolet x reg


If you want to go with the same style battery, or if that's what is reccomended, just call your nearest mercedes dealership, ask for service and explain your situation, and ask if there is an alternative.
hope this helps

Dec 16, 2008 | 2000 Mercedes-Benz CLK

1 Answer

Ignition coils on 2005 Audi S4 cabriolet


If you replaced the coils the spark plugs should also be change. The plugs are more than likely bad.

Nov 12, 2008 | 2005 Audi S4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...