Question about 1999 Jeep Wrangler
You should have a 12volt test light. Then just turn on the key and check all the fuses. Probe with the icepick end on each side of fuse. A blown fuse will light the light on one side but not the other.
Posted on Oct 10, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have the owner's manual look up fuses in the index, good illustration. If you don't, I do. It shows a relay and a 15 amp fuse. Look at the passenger kick panel, pull the cover, and it is #2 fuse (second from the top on the left) The see the relay you may have to pull the panel (two screws and a clip) the relay is the third cavity down, third row from the firewal side.
Let me know if this works for you?
Posted on Apr 03, 2009
1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts
Posted on Jul 10, 2009
SOURCE: cigarette lighter doesn't work
before u pull panel, check for 12vdc with voltmeter inside lighter socket. If u have it, then clean contacts and/or replace lighter(not socket, wiring is fine) May save a lot of work. If you don't have voltage are you 100% sure you have right fuse and not the one below, above, or next to it? I still make mistakes with numbered fuses, which number is for which fuse. To make sure I start counting at 1.
Posted on Sep 26, 2009
That or the wiring to it is shorted at some point. Remove the connection at the center back of the socket and replace the fuse--if ok, replace or repair the socket. If still blows fuse, check the wire you removed for damage near any metal object.
Posted on Nov 11, 2009
Tips for a great answer:
Feb 08, 2017 | Ford Expedition Cars & Trucks
Jan 08, 2014 | Jeep Grand Cherokee Cars & Trucks
Oct 23, 2013 | Jeep Liberty Cars & Trucks
Apr 03, 2012 | Cars & Trucks
Jul 07, 2011 | 2007 Jeep Liberty Sport
Feb 18, 2011 | 2000 Jeep Cherokee
Jul 08, 2010 | Cars & Trucks
Feb 11, 2010 | 2008 Chevrolet Cobalt
Nov 17, 2009 | 1995 Jeep Grand Cherokee
Sep 26, 2009 | Jeep Cherokee Cars & Trucks
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: