Question about 2006 Opel Corsa Utility
Tips for a great answer:
If the test lamp illuminates, refer to the Horn Test.
Ignition OFF, disconnect the inline harness connector C275. Ignition ON, test for B+ between the horn relay control circuit terminal B and ground.
If less than B+, test the control circuit for an open/high resistance. If the circuit tests normal, replace the underhood fuse block.
Momentarily connect a 3-A fused jumper wire between the control circuit terminal B and ground. The horns should work.
If the horns do not work, replace the underhood fuse block.
If all circuits test normal, test or replace the horn switch
The PCB relay horn system consists of the following components:
Horn PCB relay
Body control module (BCM)
HORN fuse 15 A
How cars clock spring works
May 17, 2016 | 2006 Chevrolet Impala
Feb 05, 2016 | Toyota Cars & Trucks
May 06, 2015 | 2006 Opel Corsa Utility
Mar 24, 2014 | 2006 Ford Taurus
Apr 17, 2013 | 2006 Chrysler Sebring
Apr 26, 2012 | 2006 Buick LaCrosse
Sep 11, 2010 | 2006 Pontiac Grand Prix
Jun 09, 2010 | 2006 Nissan Sentra
Apr 03, 2009 | 2006 Ford Fusion
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: