Question about 2007 Saturn Aura XE

Open Question

I have a 2007 sature aura xe with code p0325 that keeps coming up the ECM,knock sensor and wiring from the knock sensor to the ecm have been replace can anyone help me

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bschilz
  • 2049 Answers

SOURCE: How do I change the fuel filter on an 08 saturn aura xe?

According to other forums I checked, the word is that the fuel filter is in the fuel tank and does not need to be replaced. I would simply call a Saturn Dealer service department and confirm that this is true.

Posted on Aug 08, 2009

roniecon
  • 6826 Answers

SOURCE: 2007 Saturn Aura XE wont shift into any gear. Was

Check the shift cable

Posted on Nov 16, 2009

  • 170 Answers

SOURCE: Slight knocking sound when I turn my 2007 Saturn Aura.

it is the intermediate steering shaft. there was a bulletin but no recall on this. there is an upgraded part that needs to be installed

Posted on Jan 18, 2010

bdubsee
  • 75 Answers

SOURCE: how do you replace low beam headlight on 2008

Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

Posted on Feb 06, 2010

  • 1 Answer

SOURCE: 2009 aura xe service traction and service esc come

traction esc what do i do

Posted on May 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 nissan sentra 1.8L 4cyl. running codes P0105:P1605:P0171:P0325... engine idles fine when in park just not in gear, in gear it shakes pretty bad, also hesitates to accelerate when you press on gas...


code po105 refers to manifold absolute pressure(MAP)sensor/barometric pressure (BHARO) sensor -circuit malfunction==causes--wiring MAP sensor--BARO sensor--ECM
code p0171 refers to system to lean bank 1===causes intake/exhaust leak---AIR system MAF/MAP sensor fuel pressure /pump /injectors--HO2SW
code p0325 refers to knock sensor(KS) 1 bank 1-circuit malfunction====causes--wiring ---poor connections---KS
Check the exhaust flexible pipe at the manifold for cracks
have a fuel pressure test done on the fuel manifold to determine either pump/ filter or pressure regulator.
replace HO2S unit

Sep 21, 2013 | Cars & Trucks

1 Answer

PO325 code


Error Code: P0325
Description:
Knock Sensor (KS) 1 Bank 1 - Circuit Malfunction
Possible Cause:
Irregular rpm.
Drivability problems.
Loss of power.
Engine damage.

Wiring.
Poor connection, short to earth, short to positive, open circuit.

Knock sensor improperly torqued.
Knock sensor.
Engine control module (ECM).

Possible Solutions:
Torque Knock Sensor 1 to specifications.
Check the resistance of the knock sensor (compare it to factory specs).
Check for broken/frayed wires leading to the sensor.
Replace the knock sensor.
Check Knock Sensor 1 and Knock Control.

Caution:
This feature search for unusual (spontaneous) combustion. The sensor detects unusual vibrations and based on that it generates a voltage. Is this voltage outside a certain limit a DTC will be set.

May 31, 2017 | 2003 Toyota RAV4

1 Answer

Po325 code on 97 nissan maxima


P0325 NISSAN - Knock Sensor Circuit Malfunction
Possible causes- Faulty knock sensor
- Knock sensor circuit short to ground
- Knock sensor circuit short to power
- Knock sensor circuit open
- Faulty Engine Control Module (ECM)

Read more: http://engine-codes.com/p0325_nissan.html#ixzz29K4BM3th

Oct 14, 2012 | Cars & Trucks

1 Answer

Where is the knock sensor on a 2003 Toyota Camry?


code p0325 = ecm engine control moduel

Aug 20, 2012 | 2003 Toyota Camry

1 Answer

2000 xterra code p0325 the common issue


It will not pass inspection.
P0325 NISSAN - Knock Sensor Circuit Malfunction xicon.jpghttp://engine-codes.com/p0325_nissan.htmlForum CodePossible causes- Faulty knock sensor
- Knock sensor circuit short to ground
- Knock sensor circuit short to power
- Knock sensor circuit open
- Faulty Engine Control Module (ECM) Tech notes Very common problem with Nissan vehicles. Replacing the knock sensor usually takes care of the problem.

Jul 03, 2012 | Nissan Xterra Cars & Trucks

2 Answers

P0325 what does it mean


P0325: Knock Sensor 1 Circuit Malfunction Bank 1 or 1 Sensor

- Knock sensor circuit short to ground
- Knock sensor circuit short to power
- Knock sensor circuit open
- Faulty knock sensor
- Faulty Engine Control Module (ECM)

Replacing the knock sensor usually takes care of the problem.

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

Feb 07, 2012 | 2005 Kia Rio

1 Answer

What will happen if your knock sensor wire are not being connected and your error code p0325 keeps coming back after you reset the code?My truck is nissan pathfinder 1998 xe model.


DO NOT EVER change a knock sensor. It is a total waste of $600 and will do it again. It is not harmful to get this code. Usually, it means you have broken motor mounts, typically the right side. Do not use aftermarket, they fail quickly.

Jul 27, 2011 | 1998 Nissan Pathfinder

1 Answer

1996 4 runner had p0171 repair o2 sensor and exhaust leak rd test mil light came on p0325,p0330.knock sensor codes circuit codes banks 1,and 2.replace knock sensor harness under manifold sensor visual look...


what is the resistance of the wires between sensor and ecm connector, excess resistance from varying gauge wire and solder or solder-less connections can cause problems

Mar 10, 2011 | 1994 Toyota 4Runner

2 Answers

I have on 01 xterra-service engine light on-codes P1126 & P0325. I think the battery is about to go,could it be realated to codes? Otherwise what do the codes mean? Appreciate any help


Your battery has nothing to do with these codes. Your vehicles computers have detected a malfunction or failure in the system. This triggers these codes and sets your check engine light. Below I have listed the code meanings and some repair solutions.

P1126 - Throttle Position (Narrow Range) Sensor Circuit Malfunction.

Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery voltage is provided to the ECM. When the ignition switch is turned OFF, the ECM sends an OFF signal to throttle control motor relay and battery voltage is not provided to the ECM.

Possible Causes For P1126:
- Harness or connectors (Throttle control motor relay circuit is open)
- Throttle control motor relay


P0325 - Knock Sensor Circuit Malfunction

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Powertrain Control Module (PCM) or Electronic Control Module (ECM).

Possible Causes For P0325:
- Knock sensor circuit short to ground.
- Knock sensor circuit short to power.
- Knock sensor circuit open.
- Damaged knock sensor.
- Damaged PCM or ECM

Possible Solutions:
- Repair or resecure harness or connector
- Replace knock sensor Bank 1 (Bank 1 if applicable)
- Replace PCM or ECM

The P0325 DTC is a very common problem with Nissan vehicles. On most Nissan vehicles the knock sensor is located on top of the engine block.

knock_sensor_infiniti.gif

Jan 20, 2011 | 2001 Nissan Xterra

Not finding what you are looking for?

Open Questions:

See all 2007 Saturn Aura XE Questions

2007 Saturn Aura XE Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...