Question about Cars & Trucks
Location of MAP SENSOR diagram
On all cars, (in general,) the map can be only for EGR
or for FUELING. (the latter is called the SPEED Density System)
is this a USA car, and not Canada. (i dont do the market thing that is your job to tell me,or open hood and show me...)
MAP the out side diagram or the inside,
it is just an barometic sensor. some cars have 3 of them.
one for altitude , that you have yet to discover.
my guess ? i can t there are 3 engines. 3.5/3.8/4.0 liter
ill take a wild guess and land on 3.5L
the online fSM shows 21 diffr. (ign/fuel) systems.
the first 3.5l does use a 3 pin map and is the SDS, (map controls the AFR, there is no MAF air meter on car)
pin 1 is map signal out
pin 2 ECU quite ground.
pin 2 is 5vdc , refer. supply from ECU, also used for EGR feed back power at the EGR solenoid.
is that what you need?
the output is 0v-4v or tad more
and is an non linear function, that looks like the below.
your FSM will have batter facts.
this MAP is absolute type, that is it reads max.
under the full pressure of the atmosphere at sea level
or about 14.7 PSI.
here is a rev, engineered map as a guide, diff, car.
but works just the same way
Posted on Oct 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes new gas shocks on the lift gate will fix your problem. I had the same problem on my 2005 Pacifica and when it hit my head- I came up with the solution.
Posted on May 11, 2009
Sensor is located passenger side of the intake and mounts facing the firewall .It takes a torx bit to remove .NOT a philips as screw is hard to see from the front.I use a bit with a 1/4 in socket as a full size screwdriver will not fit.Remove screw and use a set of pliers to twist and pull back.
Posted on Mar 24, 2010
Tips for a great answer:
May 06, 2015 | 2006 Chrysler Pacifica
Jun 07, 2014 | 2006 Chrysler Pacifica
Nov 27, 2012 | 2004 Chrysler Pacifica
Aug 04, 2012 | 2006 Chrysler Pacifica
Feb 08, 2011 | 2005 Chrysler Pacifica
Jan 15, 2011 | Chrysler Pacifica Cars & Trucks
Mar 15, 2010 | 2006 Chrysler Pacifica
Nov 11, 2009 | 2006 Chrysler Pacifica
Feb 20, 2009 | 2005 Chrysler Pacifica
Oct 19, 2017 | Cars & Trucks
153 people viewed this question
Usually answered in minutes!