Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: engine service warning lights
You will need "VAG diagnostic software" - (google it) on a laptop and a £15 VAGCOM interface cable if you want to do it yourself.
Posted on Jul 10, 2008
could be numerous of thing and the list can go on, especially at times it run like a dream than other time it run horrible. Go to auto zone and have them plug it to computer for free and see if will throw a code, this way it will narrow it down instead of guessing and buying parts hoping that will fix the issue, this can be very expensive and there is no way to test the parts, beside checking the basic, plug, wires and coil. the computer will help narrow it down than guessing. then re post and one of us will try to walk you through it.
Posted on Sep 24, 2009
Ok, im sorry, in my part of the country they where not sold, i just wanted to make sure i had the correct info, i guess your in australia or the uk.i would check the egr valve and the transducer,this is a valve that controls the egr, and one more thing is the vacuum sel,if this goes bad it will not open the valve, remove the valve and check for carbon build up in the hole, if the car is running and you open the egr valve it should drop in idle even stall, if theres no change in the idle then i would say the port is clogged in the intake, you can open the valve by appling vacuum to the port or lift open fromunder the valve,good luck, these engines are the same as the 1991 vanagon,heres a diagram of the valve and how it works,heres three types but operate the same,may help.
Posted on Apr 03, 2010
Did you have the code cleared after you installed the new part because the ECM cannot clear itself, even though you installed a new part and the code is still in the system? You need to have the code erased with a OBD II scanner.
Posted on May 27, 2010
You can reset the Airbag ECU only using VAG or similar diagnostic equipment connected to the data link connector of the car, even you had repaired first fault wires cut under seat! After all faults erasing from the Airbag ECU the airbag warning light will turn OFF.
Posted on May 24, 2011
Tips for a great answer:
Apr 11, 2015 | Volkswagen Golf Cars & Trucks
Nov 12, 2012 | 2005 Volkswagen Golf
Sep 20, 2011 | Volkswagen Golf Cars & Trucks
Mar 23, 2011 | Volkswagen Golf Cars & Trucks
Feb 26, 2011 | 2006 Volkswagen Golf
Jan 13, 2011 | Volkswagen Golf Cars & Trucks
Apr 08, 2010 | 2004 Volkswagen Golf
Feb 14, 2010 | 2004 Volkswagen Golf
Sep 17, 2009 | 1999 Volkswagen Golf
92 people viewed this question
Usually answered in minutes!