At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The computer for a 1991 ford t-bird is located on the pass/side lower kick panel, heres a diagram it lists a few module locations but i circled the computer you are looking for . hope this helps.
Simple fix... Just replace the brake light switch. It is located on the brake pedal arm about 6 inches above the pedal, it will have a plug going to it as well.
open the hood then look down ont he side that is blown there should be a black rubber boot covering the light look for the wiring then slide the boot back release the sension clasp and pull it out replace and reverse the process to put everything back togather
first of all the brake lights are always in the rear only!!. take the light bulb out and while some one is appling the brake pedal check to see if yo have power at only one terminal of the socket, then release the brake pedal and make sure yu dont have power at the same terminal , now if you had poer in one of the terminal then you have to replace the socket for the brake light bulbs.
look under the dash board right at the brake pedal switc where the brake light switch is located and make sure that the wires are not broken, you can also do a quick check by just disconnecting the brake light seitch and then jump the terminal off of the brake switch and you should have light if the light works this way then you have to replace the brake light seitch
The coolant level is full and the light is still on?
×