Question about 2005 Nissan Altima

1 Answer

I recently replace the crank shift sensor, but

I recently replace the crank shift sensor, I have a 2005 Nissan Altima 2.5s but apparently I still have the same problem! Each time I start the car it revs for quite some time before finally turning on. Also the car turns off while Im driving. I've been told it could be the fuel pump or fuel filter. What do you guys think it might be?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 100 Answers

Switch on your car but don't start it, let it stay in that position for a few minutes. after start your car, if starts without problems then your problem is your fuel pump. but if problem is still there then it could be your fuel filter or timing of your car.

Posted on Apr 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan altima 2005 not shifting or showing speed


The speed sensor is probably disconnected or the wiring was damaged. The CPU needs this input to demand shifts.

Apr 15, 2014 | 2005 Nissan Altima

1 Answer

I have a 2005 nissan altima se 3.5 i have replaced the ecm the cam sensor and the the box by the battery and it still won't crank it will turn over but thats all what could be wrong.


Is it "crank no start"? Or "no crank"? What is the diagnostic results? Tell us DTCs please. And don't forget if you replace ECM you will have to learn immobiliser,otherwise it wont start.

Mar 17, 2014 | 2005 Nissan Altima

1 Answer

I changed the CKP sensor on my 2005 Nissan Altima 2.5L and it ran for about five seconds and it cut off. Now, it only cranked over but would not start as it did before.


This type of sensor usually requires computer re-calibration!! This is only done by the dealer!! Why was the crank sensor replaced?

May 27, 2011 | 2005 Nissan Altima

1 Answer

I have a 2001 nissan maxima that wont start. My mechanic front


the cp sensor is big problem for nissan. you can buy one at auto zone for $35 and with a little time and patience you can replace it. i think you might have a crank position issue. the key has nothing to do with it. just bad timing

Apr 28, 2009 | 2005 Nissan Altima

1 Answer

Just bought a 2005 nissan altima and when start the car it usally does not start on the first turn of the key (its is usually the secons) and it is not every time but almost all the time.Put it this...


If its a crank no start, there issues of crank/cam sensors that go bad (Nissan has new updated ones) also fuel pump might be bad. Rarely a starter issue on the altimas

Apr 17, 2009 | 2005 Nissan Altima

2 Answers

CRANK SHAFT POSITION SENSOR 20002 NISSAN ALTIMA


1st, Nissan had a recall on Crank position sensors for 2002-2006 Altima's. Check with you dealer before you go doing any repairs. You may discover you can get your car repaired at no charge.
NHTSA Campaign ID number :O7V527000
Symptom: Erratic behavior. Stalling and no starts and very difficult to diagnose due to the time frame in which the component actually malfunctions. The warranty should not be limited to the original owner.
I would also need more specifics as to which engine you have so I might assist you in where the location of the sensor is. The Altima had a 4 and a 6 cyl engine offered that year.

Dec 18, 2008 | 2005 Nissan Altima

3 Answers

Nissan altima starting problem


i think replacing the sensor is in order. i know all car makes have "recalibration updates" for the ecm and should be done, but have rarely fixed vehicles on just that alone. and your symptoms suggest the sensor could be intermittently bad

Nov 23, 2008 | 2005 Nissan Altima

5 Answers

2005 altima


A common problem on this vehicle is failure of the Crankshaft Position (CKP) Sensor. Failure of the CKP Sensor will result in the vehicle not starting. The cost to repair the CKP Sensor is estimated at $29.13 for parts and $26.00 for labor.

Jun 29, 2008 | 2005 Nissan Altima

Not finding what you are looking for?
2005 Nissan Altima Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...