Question about 2003 BMW 325

1 Answer

Bmw keys do not open doors remotely

My 1998 bmw keys will only work if one put the kew in the door locks.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 117 Answers

Hello there

you need to repalce the battery in the remote key.

Hope this helps, please don't forget to rate me.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Back tailgate lock won't open


Central lock problem, rear door and trunk don´t open - Xoutpost.com

www.xoutpost.com > ... > BMW SAV Forums > X5 (E53) Forum

Aug 23, 2014 - 10 posts - ‎4 authors
I have a problem on my X5, the remote key can only open the front ... I´m in a distante country without any BMW representative, but I can ... Remote keys can only lock andunlock the front doors, the rear door locks does not respond. .... the front doors openit won't unlock or lock the rear doors and rear trunk. Door Won't Lock With Key
10 posts
Sep 26, 2013
Door Lock (passenger side) won't unlock with remote
10 posts
Jan 10, 2011
Upper Tailgate wont open from the outside
8 posts
Sep 2, 2009
More results from www.xoutpost.com

X5 Tailgate Diagnosis E53 - YouTube

? 3:12
https://www.youtube.com/watch?v=ZqBfkJzUQug
Nov 7, 2011 - Uploaded by AskTheCarExperts
Lower tailgate diagnosis including relay location and fuse location. ... BMW 3 Series E90 Car Key Memory and ...

BMW Electric Boot Release Fix - YouTube

? 10:02
https://www.youtube.com/watch?v=snOVnM7hyO4
Jan 23, 2011 - Uploaded by Cpt MishMash VonRandom
Thanks**This is a quick walk through to repair the boot or trunk release button on y. ... or other BMW of the ...

BMW X5 xDrive 30i automatic tailgate does not w





Dec 14, 2015 | BMW X5 Series Cars & Trucks

1 Answer

Unlock drivers side door when key won't work


All BNW's have remote key openers built into key, so what doesn't work, the manual lock, or the remote key, or both. When you say you don't have keyless entry, on a BMW the remote is the key.
CeraCoat-NanoTech.com

Jan 28, 2015 | 2000 BMW 323i

1 Answer

1998 BMW 318I KEY REMOTE NOT WORKING, HAS NEW BATTERY IT LITES UP BUT DOES NOT AMS ALARM OR UN/LOCK OR LOCK DOORS?


If you have two keys and one does not work, you need to re-sync the keys to the car. If neither key works, then you might have a problem with the electronics. Check on line for the instructions to re-sync the keys

Oct 03, 2014 | 1998 BMW 318i

2 Answers

The doors do not open by remote control key(BMW 740il 1996 model)


Programming
When
Key batteries completely discharged. Key batteries not replaced within 60 seconds. Key added or replaced. DO NOT press remote control buttons during battery replacement.
How
Unlock vehicle. Enter vehicle. Close driver's door. Switch ignition ON and OFF. Remove ignition key. Press and hold unlock button Fig. 1 [1]. Press lock button Fig. 1 [2] briefly 3 times within 10 seconds keeping unlock button [1] depressed. Release unlock button Fig. 1 [1]. Some models: LED Fig. 1 [3] flashes slowly for 10 seconds. Some models: Central locking system locks and unlocks rapidly to indicate correct programming. Some models: Repeat above procedure if central locking system does not work and LED does not flash or LED flashes continuously

To change batteries remove panel back of key then screws on plastic bar
Batteries are available from your local motor factor shop
You might not need new batteries try re programing as described above

Apr 24, 2010 | 1998 BMW 7 Series

1 Answer

Is there an after market alarm system for mt 2005 bmw X3 that will work with my key's built in remote?


All bmw x3 have immobilizer and alarm system.
To check,lock car with remote
Unlock with key and open door alarm should activate
To stop alarm, shut door press remote.


Nov 07, 2009 | 2005 BMW 3 Series

2 Answers

I locked my wifes Z3 with the key when I washed it and now the passenger door will not open with the remote or the door handle,have I put the system out of sinc


i think so. disconnect battery first, put keys in ignition and turn to the point before firing up would be, refit the battery earth. Should now be able to res ync fob and get door open

Oct 07, 2009 | 1998 BMW Z3 Roadster

2 Answers

Programming instructions for keyless remote Does anyone have the programming instructions for 1998 honda passport keyless remote (FCC #HYQ1512R)?


Get into your passport and unlock all doors. Leave drivers door open. Put key into ignition. Turn to ON (not start), then OFF three times within 5 seconds. Close and open the drivers door twice. Turn key to ON then OFF 5 times within 5 seconds. Close then open the drivers door. Press either the lock or unlock button on the remote. Doors will lock then unlock. Press the button again. Doors will lock then unlock again. Close door to finish programming. If it doesnt work, try it again but turn the key faster. You have to do it all pretty quick, but I had it done on the second try.

Oct 03, 2009 | 1998 Honda Passport

1 Answer

BMW Keyless Entry not working


hi, to program the keys to the vehicle is quite simple

1) open the vehicle, sit inside and close the door

2) insert the key in the ignition and turn to position 1 so that just the air bag light illuminates

3) press and hold the unlock button on the key and remove the key from the ignition (do not release the unlock button)

4) while still holding the unlock button with the key removed press the lock button 3 times

5) release the unlock button on the remote and the door locks should lock and unlock if the proceedure has been carried out correctly

6) to program any other key(s) press and hold the unlock button on remote and again press the lock button 3 times but do not insert it into the ignition or turn the ignition on as done previous.

you may want to print these instructions and read them a few times before proceeding, if you muck up the process while programing keys, no harm will be done, you just have to start the process over. hope this is of some help, regards mark.

Apr 07, 2009 | 1998 BMW 5 Series

1 Answer

Recode a key 4 bmw 318i cenral locking


To carry out this procedure you need to have one working key and one key which requires programming. It may help sometimes to hold the key close to the rear view mirror as this is where the sensor is located in most models. 1. With both keys, get in the car and close all windows and doors. 2. Put working key into the ignition and turn to position 1 (the accessories should turn on) (try also position 2) 3. Turn the key back to position 0 and take the key out of the ignition. 4. Using the working key, hold down the unlock button, press the BMW logo (lock button) 3 times, and release the unlock button. Doors should lock and unlock. 5. With the new key, hold down the unlock button and press the BMW logo (lock button) 3 times and let go of the unlock button. Doors should lock and unlock and you're done!! If not working try the following PREPARATION 1. Close all doors, trunk, hood and sunroof. 2. The security system must be in 'disarm' mode. The key must be removed from the ignition key slot. ENTER CODE LEARNING MODE 3. Open trunk and leave it opened. 4. Open the drivers door and sit in the drivers seat. 5. Close the drivers door. 6. Cycle the ignition switch 5 times between the 'OFF' position and position 2,(ignition 'ON', all dash warning lamps will illuminate). The red status LED will illuminate continuously, and the siren will 'chirp' once, to indicate that the code-learning mode has been initiated. ?Do No start the engine.? The Ignition switch cycling in step #6 must be performed within 10 seconds. The sequence in steps #1-#6 must be performed within 45 seconds. REGISTER/DELETE ID CODE(S) 7. Open drivers door, (remain seated in the drivers seat) 8. Close the drivers door. 9. Press and release any button on the remote you wish to register in the system. The status LED will shut off momentarily to indicate that one code has been registered. 10. Repeat steps 7 thru 9 to register the three ID codes. It is possible for the system to memorize a total of 4 different ID codes. As a new code is initialized into the memory, the oldest code is automatically deleted. If you had lost your remotes and wished to delete the lost remote ID codes from the memory, you could initialize the ID codes from a newly purchased replacement transmitter four times thereby deleting the previous ID codes from the system memory. EXITING CODE - LEARNING MODE: 11. Open drivers door, and exit from the vehicle, leaving the door opened. 12. Close trunk. 13. Close drivers door. The LED will turn off and the siren will 'chirp twice. 14. The initialization procedure is now completed; Test all remotes to confirm operation. If this doent work your alarm/central lock needs to be reset

Mar 28, 2009 | 1996 BMW 318

1 Answer

Keyless remote


Disconnect the battery from your car (negative cable only) overnight. Make sure you have your radio reset code before doing so.

Then reconnect after 10 hours, and make sure you have remote handy as alarm may go off. Then if that doesnt fix it, go to driver door, then insert master key, pull up on handle first all the way and hold it. Then turn the key slowly all the way so the doors unlock and continue turning the key. This will reset the central locking system as yours may have gotton stuck. then remove key let go of handle, open door and try to lock and unlock doors from switch inside car.

Then try remote. It should work, this is what the dealer will do and charge you about $350...if it doesnt work order a new remote b/c yours may have become damaged by liquid or dropping?

Have a great day,

Thanks,

Mark

Dec 30, 2008 | 1998 BMW Z3 Roadster

Not finding what you are looking for?
2003 BMW 325 Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...