Question about 1993 Subaru Impreza

1 Answer

Check engine light won't turn off

How do i get the check engine light to turn off?

Posted by on

  • bevandjims Apr 23, 2009

    how do you read the code

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

Take off the battery wires for 15 minutes. That will reset the computer. But if it senses a problem it will come right back on then you should have the code read

Posted on Apr 23, 2009

  • Jeremy Reddick
    Jeremy Reddick Apr 23, 2009

    Go to Auto Zone, Kragen, or the dealership and ask them to read the code. Most places do it for free. Find out what that code says then you can fix the part that is bad and move on from there

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Renault megane scenic


The check engine light means something is wrong in your car or ecu. You should visit Renault to see what\'s going on with a PC diagnostic tool. The other light is a sign the diesel heaters are preparing before starting the engine. But you definitely need the diagnostic tool with the right cable to check your ecu for faults.

May 20, 2013 | Cars & Trucks

1 Answer

Engin light and TCL light won't switch off. When


TCL means Traction Control, and you turn it on and off with a switch. But you did not tell us make, model, or year, so we can't tell you how to turn it off or on.

May 04, 2013 | Cars & Trucks

1 Answer

1987 Ford Ranger Check Engine light won't turn on


Since you have an '87, you most likely don't have one if you have never seen it on. Pull the instrument cover panel, then the three hex screws that hold the idiot light panel on the instrument cluster. The 1987 had a check engine graphics gel, but the instrument cluster did not have the check engine function on the printed circuit board. There is no such light included on that year model, I am not sure what month between the 1987 and 1988 model years introduced it.

Feb 09, 2013 | 1987 Ford Ranger

1 Answer

Won't start unless check engine light is on


I would suggest having someone check the circuits at the key switch.
The switch could be going bad.
The check engine and other warning lights must come on as a self-test when you turn the key on, then go off once the engine starts.

Jan 16, 2013 | 1995 Honda Passport

1 Answer

Rear brake lights won't turn off


Check brake light switch (likely faulty). This issue may not be related to the engine issue.
If not the brake switch then check wiring for possible short circuit.

Nov 03, 2012 | 1999 Pontiac Sunfire

1 Answer

2005 Sebring sputter and died won't turn on


sounds like an electrical prob. check for corroded battery cables

Sep 05, 2012 | 2005 Chrysler Sebring Sedan

2 Answers

I changed the oil in my 98 concorde and now it wont start. The oil light is on but not the check engine light.\


do you here the fuel pump working when you turn the key?If not could be a fuse that runs the fuel pump.

Aug 05, 2012 | 1998 Chrysler Concorde

1 Answer

2003 Landrover Freelander SE V6 == Service Engine Soon (not Check Engine) light has been infrequently flickering on/off for the past 8 weeks. While light is on, engine hesitates slightly.Vehicle would not...


If it won't start have a compression test done and see if one bank doesn't have compression . The intake cam is known for breaking at the front lobe

Nov 09, 2011 | 2002 Land Rover Freelander

1 Answer

Stop on stop sign engine died


If the engine won't fire up, but your starter turns over, you may want to check your timing unless you have a check engine light on. If the CEL light is on, have the codes scanned.

If the engine won't turn over with the starter or it clicks, have your battery tested at autozone or advanced auto parts. Replace the battery if it is bad. Else, have your starter tested.

If the engine still won't turn over and the battery and starter are tested fine, you may have a blown fuse, bad ignition switch, or a failed relay.

If the engine fires up but randomly dies and starts back up, you either have a failed sensor, failing fuel pump, clogged fuel filter, bad plugs or wires, or a failing ECU.

Sep 06, 2011 | 1996 Nissan Quest

Not finding what you are looking for?
1993 Subaru Impreza Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...