Question about 2005 Pontiac Vibe

1 Answer

I purchased a used Donnelly 0110103 rear view mirror that has a compass and map lights. I'm going to install it in my Pontiac Vibe that has a mirror with map lights. The Donnelly has 4 wires (the Vibe has 2). Of the 4 wires, one has a white stripe. I can't find any instructions for the wiring for the Donnelly mirror. On the Vibe, one wire has to be neg and one has to be pos; however, I don't know what the wiring is on the Donnelly to match them up. The mirror came from a CAPRICE IMPALA SS. On the Donnelly it also has "Rd 1987". Can you help?

Posted by on

  • Anonymous Mar 17, 2014

    Need to know the pos and neg wires on the rearview mirror for a 2013 equinox?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Black=neg
black with slim white=door switch
black with wide blue or wide dark green=accesories(switch controlled pos)
black with slim light green=live pos(always connected for map lamps)
If you wire it as such,map lamps would come on both when you open the door and with doors closed when you turn on the switches.

Posted on Jun 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do i have to remove the door panel on my 2006 pontiac vibe to change the rear view mirror


In most cases you do especially if it is a power mirror. If it is manual, you may only have to remove the plastic triangle panel to access the 3 bolts securing it

Apr 12, 2015 | 2006 Pontiac Vibe

1 Answer

How to do I get the compass and temperature gauge to work in the rear view mirror again. Directions are NW and SE all the time


Calibrate the compass built into the upper-right corner of the rearview mirror by holding the compass button (an "N" with two crossing lines) until your zone number appears. Determine your zone number by looking at the map in the owner's manual. Press the compass button until a "C" appears. Then drive in a circle three times at 5 mph or less in an uncongested area. The compass will automatically orient as a result of the circling.

Read more : http://www.ehow.com/how_5927729_reprogram-avalon-after-battery-change.html

Aug 19, 2014 | 1999 Toyota Avalon

1 Answer

How to replace a the passenger side mirror


will have to remove the door panel unless it has a small piece in the upper corner by the mirror. should have three 10mm nuts that hold it on.

Aug 27, 2009 | 2005 Pontiac Vibe

1 Answer

Electrochromic rear view mirror does not dim when turned on


These mirrors are all made by one company, no matter the car maker, they all have the same problems, they are very unreliable, if u have power to the mirror which I am 100% sure u do the mirror will need to be replaced, they are not repairable they are about $250-300

Apr 11, 2009 | 2001 Jaguar S-Type

1 Answer

Replace the rear view mirror


Gently tap the base of the mount upwards. I just replaced mine and I thought there was a cover over the winshield mount, turns out it is just pushed on to the wedge that is mounted to the windshield. Good Luck, webree

Nov 04, 2008 | 1998 Buick Century

1 Answer

AUTO DIMMING MIRROR


The Donnelly mirrors use the same 7-pin plug as the Gentex, but the pin-outs are different. Here is the pin-out for the Donnelly mirrors:

Pin 1 - +12 volts
Pin 2 - Courtesy lamp input
Pin 3 - (varies depending on mirror features)
Pin 4 - (varies depending on mirror features)
Pin 5 - Reverse disable (+12 volts in reverse)
Pin 6 - Ground
Pin 7 - Demand lighting input

Aug 22, 2008 | 1998 Buick Century

1 Answer

Custom Rear view mirror


Hiya...ALL factory-installed rearview mirrors are installed with different wires due to options.
About 6 different rearview mirrors are installed with those options such as On-Star, light, compass, and those features which use different wires....THIS CANNOT be modified with different rearview mirror....**for example, the Equinox owner attempt to pull out a factory-installed base rearview mirror and put in different one that has compass/temperature built into the rearview mirror**

However, the wires are located inside the front headliner which requires removing the sunvisor (and possible removal of interior plastic trim part at the left/right ends of the windshield) prior to pull the headliner down, and a small metal philips or torx screw is used to secure the rearview mirror onto the bracket glued to the windshield.

The best solution is to leave the original factory-installed rearview mirror in place.

May 16, 2008 | 2006 Chevrolet Equinox

Not finding what you are looking for?
2005 Pontiac Vibe Logo

1,383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...