Question about 1999 Chrysler 300M

1 Answer

Need location of coolant sensor on 2002 chrysler 300m

Need location on engine of coolant sensor for
2002 chrysler 300m special

Posted by on

  • 5 more comments 
  • Anonymous Mar 14, 2014

    Where is the oil filter located in a 2003 Chrysler 300m

  • Anonymous Mar 17, 2014

    Trying to find an OWNERS and a SERVICE Manual specific to the 2004 Chrysler 300M SPECIAL - not the 300M, but the 300M SPECIAL

  • Anonymous Mar 17, 2014

    Trying to replace the oil pressure sensor and need a diagram of the engine that shows where it is located.

  • Anonymous Mar 17, 2014

    just need information on how to remove and replace waterpump on chrysler 300m

  • Anonymous Mar 17, 2014

    need to replace the water pump on a 2004 chrysler 300m

  • Anonymous Mar 24, 2014

    where is the fuse located, how is it labeled

  • Anonymous Mar 28, 2014

    replace alternator belt on Chrysler 300M 3.5 engine

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 74,896 Answers

Near the thermostat I think, look for this part.

need location of coolant sensor on 2002 chrysler 3 - f2e8303.jpg

Posted on Apr 22, 2009

  • yadayada
    yadayada Apr 23, 2009

    what is inappropriate about this???

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code Po117 for 2001 Chrysler 300M


ETC Sensor Voltage to low---Engine coolant tem sensor input below the min acceptable voltage

Oct 06, 2014 | 2001 Chrysler 300M

3 Answers

Need to put engine coolant in a 1999 Chrysler 300m. The reservoir says it takes a special kind of coolant. What kind? Can I use Prestone 50/50


whar steps do I take after draing the coolant from the radiator. I have a 1999 chysler 300m. Should the engine be running while replacing the coolant. This car does not have a radiator cap to remove. Do I just add the coolant in the resivor while the engine is running?

Dec 01, 2010 | 1999 Chrysler 300M

1 Answer

I have a 2002 chrysler 300m problem code p0073 aimbient air sensor , i bought the sensor but i dont know where it is located


Hi,
On2.7L models, the IAT sensor is located on the left side (driver) of the Intake Manifold plenum, if you are standing in front of the car, it is the sensor right before the two vacumm hoses plugged into the Intake Manifold.

On 3.2L/3.5L models, the IAT sensor is incorporated whthin the Map sensor which is also located on the left side (driver) of the upper Intake Manifold plenum. Right by the coolant reservoir tank.

Good Luck

Mar 07, 2010 | 2002 Chrysler 300M

1 Answer

How to reset my tire sensor for a 2002 300m and what type of coolant does it use also my spare tire sensor keeps going off


make sure your spare tire has 35psi, you can get your tire light to go off by makeing sure all tires are at 35psi then just drive the car a few miles(2-5) and the car will automaticaly turn light off. as for coolant the green conventional works just fine

Feb 19, 2010 | 2003 Chrysler 300M

1 Answer

Power steering pump on a 2002 chrysler 300m how do u replace it mine is locked up


The belts need to be removed and they take a special wrench. If you have to ask how chances are this is best left to the experts. The plastic sensors etc can cost you way more than any potential savings. There are several engine combination's of motors on this car and you don't say which it is you have. Best to leave this one to the experts.

If you insist - then
remove the negative battery cable
- remove the cover on top of the engine
remove the belt [s]
remove the hoses to the power steering pump
remove the bolts and the power steering pump assembly
- reverse this procedure and then 'bleed the lines' to remove any air.

Again I strongly suggest you leave this job to the experts.

Feb 03, 2010 | 2002 Chrysler 300M

1 Answer

I have a 2002 crhysler 300m with a 3.5 high


Hello, Had the same problem but i did just the opposite I put a 2002 engine in a 2000. I found out that the cam sensor spocket (for the timing belt) Has the holes for the cam sensor in a different spots causing all kinds of problems also they did the same with the flex plate so I hope you took the one off the 2002 and used it or you will have to pull it back out and change it. Good luck

Nov 27, 2009 | 2002 Chrysler 300M

2 Answers

Cooling fan switch/or sensor


The Coolant temp Sensor is located right under the top radiator hose (on the engine side), with a little black connector!, You might have to remove th etop hose to get to it with a deep socket and extension!.
Also Dont Forget to blled the coolant system by the bleeder valve uptop right near/above the coolant sensor!.(10MM Mini socket w/ extension IIRC!)

Jun 03, 2009 | 2002 Chrysler 300M

2 Answers

2002 Chrysler 300M Special, 3.5


You need to bleed the Cooling system(While engine is on...) through the bleeder valve on top of the engine (w/ heater selected ON,and on High Speed ofcourse!).

Apr 05, 2009 | 2002 Chrysler 300M

Not finding what you are looking for?
1999 Chrysler 300M Logo

900 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...