Question about Audi A6

3 Answers

Want to know where the ecu is in 1995 audi a6

The place for the ecu in 1995 audi a6 2.8l

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

No its under the passanger carpet under a plastic cover

Posted on May 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Hey there,,as far as i no the ecu for the audi is under the wiper pannel ....most of the volswagons which are also german cars have the ecu there,,,,hope that helps

Posted on Apr 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Any one have a ecu for sale 1995 audi a6 quattro number is 8a0 9o6 266j

Posted on Nov 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 audi 2.7t, i just got a stage 3 up grade ecu, were is the original one located and can i just change it out (plug and play)


It's in the engine bay, top left near the windshield. Theoretically you can just swap it out but the original is soldered in place, it doesn't just plug in.

Aug 16, 2013 | 1999 Audi A6

2 Answers

Timing belt 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)


Timing belt routing diagram for 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

I can not insert the picture here because bad page. Send me your e-mail address, and I will send you back the picture.

Jun 16, 2012 | Cars & Trucks

1 Answer

Blown fuse in ecu housing, it was the 50a in the blue slot not sure what it was for


look like could be starter shorting out.see if starter working.

Feb 11, 2012 | 1995 Audi A4 1.9

1 Answer

WHERE IS THE ECU ECM COMPUTER LOCATED ON A 1999 AUDI A6 QUATTRO?


The Engine Control Module (ECM) Electronic Control Unit (ECU) is placed on the engine compartment at the left bottom side of the windshield, inside a black color plastic box. See picture below:

tdisline_891.jpg

Sep 19, 2011 | 1999 Audi A6

1 Answer

1995 audi a6 won't start after replacing bad


1995? they did not have the immobilizer installed then, recheck your connections and does the starter turn over? look for open fuses also

May 08, 2011 | 1995 Audi A6

1 Answer

Abs and brake light blinks with beeping sound on my 2000 audi quattro A4 1.8T. What could be the problem? How can I fix it?


Check & replace if necessary the brake pedal switch placed above pedals on the support.
If the problem still occurs you might access the ABS ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS ECU & reset it.

Dec 14, 2010 | 2000 Audi A4

1 Answer

How to remove an ECU from an Audi multitronic gearbox


1. Jack the car up on Axel stands/ramps or if you have access to a pitit will make life a little easier. 2. You need to remove the splash guard underneath the car so you can seethe back of the gear box. 3. Drain the gear box of oil which will require a special tool which youcan get for £10 from Draper Expert 1/2 Square Drive Drain Plug Key For VW Or Audi63476 Draper Hdpk1. 4. Remove the electronic cable that connects onto the ECU that protrudesout the back of the back of the gear box. 5. The back of the gearbox has 12 torques holding the cover in place.Once you have removed most of them you will need to remove the rear enginemount to get at the last torque bolt at the top of the gear box. 6. Support the gear box with a trolley jack so you can lower the gearboxto get at the last few torques. 7. The rear engine mount can be slid towards the back of the car so youcan get at the back of the gear box. There is a couple of other bolts that youwill need to remove that hold the ECU cable in place. 8. Once you have all the torques that hold the gearbox in place thecover can be slid off. 9. Once the cover is removed be careful not to bend the metal gasket asit can be used again as long as it's not damaged (Audi would probably changethis along with the ECU seal). 10. Once the cover is off you can now see the ECU which is held in placeby 3 torques or Star bolts. 11. After the 3 torques have been removed you can then slide the ECU offbut be careful not to bend or tilt it as you remove it from the gearbox as ithas guide rails made of plastic which can break easily.

Feb 10, 2010 | 2001 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

703 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14204 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...